Company main products:
2.Molded graphite block
3.Graphite rod
4.Graphite tube
5.Graphite plate
7.Graphite crucible
Customized High Pure and density graphite products/graphite block for EDM
Edm Graphite,Graphite Block For Edm,Edm Graphite Electrodes,Isostatic Graphite Column CARBONS TECH&CREATION(HENAN) INDUSTRY CO.,LTD , https://www.kygraphiteparts.com
Features:
•The newest high technology and Button Panel Control, new type of heating material.
•The machine is made up of embedding machine, freezing part .the design can be flexibly selected between embedding machine and freezing part.
•Automated processor control system make it possible for presetting the start time and temperature of any day.
•Special nano technical make it heat up quickly and equably.
•The LCD display can show you the temperatures of the paraffin bath, thermostatic bath and paraffin nozzle. So the user can operator it easily.
•Inductive head lamp and metal switch ,user can touch the switch by tweezers or knifes to control the paraffin.
•Automatic memory the presetting temperatures and start to work based on the time.
•Large capacity crock can contain enough paraffin for use at one time.
• Multilevel security protection system.
•There are 3 heating hole for forceps in two side of the paraffin nozzle .
Specification:
• Capacity of the wax bath : 6000 ml.
• Melting paraffin prefabricate: 0 ~99ºC
• Freezing range temperature: 0 ~ -20ºC
• Complete machine consuming more electricity: Less than 1KVA
• Control mode: Auto, foot
• About 120pcs of molds or 140pcs cassettes for each hot reservoirÂ
• Capacity of Cold plate :About 40-60 pcs of Tissue Mold
• Environment temperature: 0ºC~ 40ºC
• Time control: Opening and closing time of the machine is set in 24 hours optionally.
• Nominal voltage: AC110V-220V±10%.
• Rated frequency:50Hz/60Hz
• Dimension: 1180×660×470mm
• Weight: 45kg(for YD-6D) 65kg(for YD-6L)
Â
Standard Accessory
1 Foot Switch
4 pcs Tissue Molds
1 pc Power Wire
2 pcs Fuse
Â
Our isostatic graphite and Molded Graphite were tested at the National Electrical Carbon Products Quality Supervision and Inspection Center. The main physical and chemical performance index as follows: the compressive strength--125 mpa, shore hardness -- 65 degrees, resistivity --12 mu Ω m. At the same time, the 10μm,8μm,6μm,4μm products have already began Large-scale production,.and unanimously acknowledged by customers. The 2μm,1μm graphite products are under trial. Our company high quality of isostatic pressing special graphite yield above 90%, far ahead of industry the yield of 70%, the first in the country.
EDM graphite, also known as graphite block for EDM, is a new type of material, which is now more and more widely used in the precision mold processing industry. At present, in mold processing plants in developed European countries, more than 90% of mold processing electrode materials are graphite. Copper, the once dominant electrode material, has almost lost its advantages compared with graphite electrodes.