Model NO.: roll forming machine
Automatic Grade: Automatic
Product Type: Paper Plate Machine
Trademark: HAOSHUO
Transport Package: Nude Packing
Specification: depending on specific requirements of customers
Origin: China
HS Code: 84552290
Automatic steel metal floor deck roll forming machine,machinery
Metal deck forming machine is aided and optimized by computer. The metal deck produced by this machine has high strength with big wavelength. Used on high buildings , it not only saves steel mold plate, but also reduces the weight of storey. With the same bearing capacity, it economizes steel and cuts down investment accordingly.

Component:
decoiler---roll former---cutter---hydraulic pump station---product table---control cabinet

Machine Parameters:
material galvanized sheet, etc
thickness 0.7-1.3mm, or other thickness
Forming specifications depending on specific requirements of customers
Forming speed 12-15m/min
Main motor power 22-30 kw
Cutting mode hydraulic cutting
Hydraulic station power 4 kw
Control system PLC systems from Mitsubishi and Panasonic products
Optional accessories hydraulic uncoiler

Automatic Steel Metal Floor Deck Roll Forming Machine, Machinery
Automatic Steel Metal Floor Deck Roll Forming Machine, Machinery
Automatic Steel Metal Floor Deck Roll Forming Machine, Machinery
FAQ:
1) Q: Are you manufacturer or trading company?
A: We are manufacturer and trading company .
 
2) Q: Do you provide installing and training overseas?
A: Overseas machine install and worker training services are optional.
 
3) Q: How is your after sales support? 
A: We provide technical support on line as well as overseas services by skillful technicians. 
 
4) Q: How does your factory do regarding quality control? 
A: There is no tolerance regarding quality control. Quality control complies with ISO9001. Every machine has to past testing running before it's packed for shipment.
 
5) How can I trust you that machines pasted testing running before shipping?
A:  1) We record the testing video for your reference. Or,
    2) We welcome your visit us and test machine by yourself in our factory.
 
6) Q: Do you sell only standard machines?
A: No. Most machines are made to order.
 
7) Q: Will you deliver the right goods as ordered? How can I trust you?
A: Yes, we will. We are Gold supplier of Made-in-China with SGS assessment (Audit report can be provided). 

Contact us:
 
Tel: +86 151 5222 5198
 
 

Water/Wet type wire drawing machine

LT23-25/288 water tank wire drawing machine
(1) Main technical parameters:
1. Maximum incoming line strength: ≤ 1400Mpa;
2. Drawing passes: 23, 25;
3. Maximum incoming wire diameter: 1mm;
4. Minimum outlet diameter: 0.1-0.12mm;
5. Maximum drawing speed: 15m/s;
6. Average pass compression ratio: 14%;
7. Motor power: 15-18.5kw.
(2) Equipment composition for wet wire drawing machine
1. The frame is formed by welding section steel, and the tank body is formed by welding stainless steel plate;
2. The tower wheel is made of 45 steel, the working surface is sprayed with tungsten carbide powder (WC), the surface hardness is ＞ HRC60, the surface finish is 0.4Ra, and the service life is more than two years;
3. The machine coefficient is large in the front and small in the rear, which is conducive to improving production efficiency and continuous production;
4. Both the mold base and the mold base have angles, and the steel wire is always in a straight line during drawing, which is conducive to improving the quality and not easy to break the wire;
5. Tower wheel and mold are cooled by immersion in self circulating lubricating coolant;
6. The transmission mode is driven by synchronous belt to eliminate oil leakage and reduce noise;
7. The main bearings are made of NSK brand from Japan, and the motors are frequency conversion motors;
8. The finished product mold is installed in the mold base that can adjust the angle, which is conducive to the alignment of the finished product reel and the adjustment of the product ring diameter;
9. Box overturning force ≤ 200N;
10. All wire passing wheels and rollers are subject to quenching treatment, with surface hardness ＞ HRC50;
11. AC frequency conversion speed regulation is adopted, and the frequency converter adopts Siemens or Huichuan brand;
12. The electric control mode is PLC control, and the PLC is made of Mitsubishi or Siemens;
13. The touch screen is Taiwan made color touch screen, and low-voltage electrical components are all domestic well-known brands;
14. The machine is equipped with inching, front and rear linkage, start, stop and other functions. The human-machine interface of the main operating console has the functions of length, speed preset display, fault query, and equipment status display;
15. The electric cabinet is a standard cabinet produced by professional enterprises.

Water/Wet Type Wire Drawing Machine,Water Type Wire Drawing Machine,Wet Type Wire Drawing Machine,Water Tank Wire Drawbench

Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com