AWS A5.18 ER70S-6 CO2 mig welding wire Quick details: 1. Type: CO2 wire/SG2 welding wire/ Mig wire/ GMAW wire Solid welding wire/ Gas shielded welding wire 2. Raw material: MIld steel/ Carbon steel/ Qingdao steel wire 3. Surface--------Copper coated / copper clad 4. Application: Co2 shielded welding, welding of mild steel material,  Ship/bridge welding, Arc welding etc 5. Dia: 0.8 0.9 1.0 1.2. 6 2.0mm 6. Packing: 5Kg, 15Kg 20kg spool, 100~350kg drum 7. Spool type: D270/D300 plastic spool, K300 Metal spool 8. Cer: ABS ISO CE GL BV NK LR CCS TUV DB ROHS 9. Confirm with: GB/T ER50-6/ DIN SG2/ JIS YGW12 AWS ER70S-6/ BS A18/ EN G3Si1
Air valve
The
new double-canisters exhaust valve consists of a big canister and a small one.
When
there is no water in the pipe, the canister in the body drops down to the full
opening place. When water coming in, the air in the body is released from the
big canister, then water can be filled into the pine immediately. When there is
no air in the pipe, water comes into the valve cavity and causes the two
canisters rise up to the closing place. And the big canister stays closed so as
to improve the capacity of transporting water and to economize energy.Since air is
often dissolved into water, when transporting water, the air is released from
water continuously , however, when reaching the quantity, the small canister
will drop down with a small amount of air released from air vents . Otherwise
the air accumulating on the top of the pipe will reduce the pipe system`s
capability of transporting water.
When there is
negative pressure in the pipe, the big canister drops down and the discharge
hole is open. Then the valve takes in air in good time so that it can avoid
affecting normal water supply due to the negative pressure on the pipe.
1.Unique design:
The two canisters are made of non-toxic
engineering plastics of high strength., with concise structure, light weight,
reliable and stable exhausting.
Inside and outside surfaces of the body, cover
and dust-prevented cap are all coated with epoxy resin powder with no iron
exposed. Materials of inner components are made of stainless steel and
engineering plastics so as to prevent corrosion and to ensure purity of media.
The sealed seat, made of bronze, improves the
ability of anti-abrasion, and prolongs service life.
2.Excellent anti-corrosion:
Inside
and outside surfaces of the body, cover and dust-prevented cap are all coated
with epoxy resin powder with no iron exposed
3.Sanitary standard:
Non-toxic epoxy resin powder used
comply with sanitary standard GB/T 17219-1998.The coated resin is in accordance with
standards of drinking water.
4.Tested summary:
The media
is air. In the procedure of the test,
the air temperature shall keep between 5℃ and 45℃. The fluctuation of air flowing value shall be
within 4% and that of the pressure value within 5% while that of air
temperature value within 2%.
Sealing
test at a low pressure. When the
pressure goes up to 0.05 Mpa, 0.1 Mpa, 0.2 Mpa, 0.3 Mpa, 0.4 Mpa, 0.5 Mpa, the
valve maintains the pressure at 12mins with no visually detectable leakage of
the sealed surface.
Repeated
test of exhausting Putting water into
the valve and discharging air every 8-9 seconds. Then increasing the pressure to
1.6 Mpa , keeping it for 2mins before releasing. Conducting leakage test for
250 times with the result that there is no visually detectable leakage and no
structural damage. Then testing the sealing at a high as well as low pressure,
no visually detectable leakage.
Repeated
test of airing Injecting air into the
valve till the valve closes fully, then cutting off the air till the valve open
fully. Repeating leakage tests for about 25000 times with the consequence of no
visually detectable leakage and no structural damage. Then testing the sealing
at a high as well as low pressure, no visually detectable leakage.
Test of the
valve's endurance The valve is poured by
water with a pressure of 1.6 Mpa at a temperature of 50℃and maintaining it for five days, then
checking whether the valve can be normally opened or not after releasing the
pressure.Testing the leakage, resulting in no visually detectable leakage and
no structural damage. Then testing the sealing at a high as well as low
pressure, no visually detectable leakage.
Air Valve,Exhaust Valve,Air Release Valve,Air Valve With Single Orifice SUZHOU YUEDA VALVE CO., LTD. , https://www.szyuedavalve.com
Products Show
factory scale
Certificate
Â
C
Mn
Si
P
S
Ni
Cr
Cu
0.08
1.51
0.89
0.015
0.013
0.016
0.021
0.18
Tensile strength Rm
(MPa)Yield strength Rel or Rp0.2
(MPa)Elongation ratio (%)
Fracture Engergy
(J)
545
452
29
91(-30°c)
Â
Â
Product Description
Package:Â
Â
Net weight 5kg 15kg 20kg in plastic spool; 72 cartons on pallets, 22 pallets in 20GP container
Â
Net weight 100kg 250kg 350kg per drum; 2Â or 4Â drums one pallet
Â
Water-proof paper&plastic layer wound on spool, one spool in a carton
Â
Application:Â
Â
Used to weld ship building steel (Â A, B, D, E, A36, D36, E36 )Â and equivalent mild steel or 550 Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.Â
Â
Delivery:Â
Â
MOQ: 5MT, Net weight delivery
Â
Time: 10~20 days, Qingdao Port
Â
Package: OEM package, Neutral carton, SOLID brand carton
Â
1. Delivery time to North of America is 30~35 days.Â
2. Delivery time to Asia countries&middle east is 5~30 days.Â
3. Delivery time to Africa countries is 40~50 days.Â
4. Delivery time to Euro countries is 30~40 days.Â
Â