Slim Rotary Damper mainly used for small diameter, long height space. Shaft Damper is used to dampen drives, control speed, and many other applications. Shaft damper are widely used in invisible screens. Shaft damper can make the movement of structures soft, quiet and safe to mitigate the impact, avoid the damage, increase the mechanical life, reduce noise, and improve product quality.
NOTE:
1. Please contact the corresponding product engineer for
specific torque products
2. Max. rotation speed: 50r/min
3. Max. circle rate: 5 cycle/min(Clockwise180 °, 180 ° anti-clockwise for 1 cycle)
4. Operating temperature: -10~50℃
5. Storage temperature:-30~80℃
Applied torque: (T)
Test Temperature: 23+/-5℃
Rotating speed:20r/min
Durability test Method:Clockwise 180 °, 180 ° anti-clockwise
Rotating speed: 20r/min
Test Frequency: 1cycle/min
Test Temperature: 23±5℃
Durability test cycle: 50000cycle
Test result criteria: Store in the room temperature for 24 hours or more after the test, recording to the torque T=T±30%T.
Shaft Damper Shaft Damper,Drive Shaft Damper,Crankshaft Damper,Flexible Shaft Coupling Shenzhen ABD Equipment Co., Ltd. , https://www.abddamper.com
1. Cold roll forming machine introductions
Different cold roll forming machine can produce different shapes of steel roof, wall sheets according to the clients' profile drawings and requirement. Steel roof, wall sheets are new building materials with various thickness and colors.
2. Cold roll forming machine advantages:
Cold roll forming machine has many advantages, such as low cost, easy installation, short building period, re-cycle use, beautiful appearance, and are light weight but high strength. Cold roll forming machine is used as the roof and walls of gymnasiums, airports, theatres, factories, warehouses, garages, exhibition centers, etc.
3. Cold roll forming machine main components
Manual decoiler, Main forming machine, Hydraulic press forming unit, Hydraulic system, Electrical control system, Hydraulic cutter, Normal receiving stand
4Cold roll forming machine Workflow
Decoiling the sheet - Sheet guiding - Roll forming - Press - Measure length Cutting the panel- Panels to the supporter
5. Cold roll forming machine raw materials
1. Hot dipped galvanized steel coil.
2. Galvalume steel sheet(Zinc- aluminum galvanized steel sheet)
3. Aluminum sheet.
6. Cold roll forming machine machinery:
Number of forming rollers: 13-18groups
Material of shaft: 45# steel adjustable treatment. Outer diameter 75mm
Material of roller: 45#steel, plating hard chrome on the surface, rigidity HR55° -57°
Main motor power: 5kw
Speed of forming: 5-10m/min
Stand: 350# steel welding
The plating chromium of rollers' surface: 0.05mm
Thickness of the steel: 0.4-0.8mm
Chains: 1 inch
Thickness of wall plate: 14mm
Dimension of the machine: 7 m*1.2m*1.5m (depend on final design)
Weight of the machine: 4 ton (depend on final design)
7. Cold roll forming machine installation and training:
1)If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
2)Without visiting, we will send you user manual and CD to teach you to install and operate.
3)If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
4)Spare parts: Bearings, buttons, chains, magnetic valve etc.
Main machine:
Loading Pictures:
Workshop:
No.
Cold Roll Forming Machine
1
Suitable to process
Color steel plate
2
Width of the plate
1000mm
3
Thickness of the plate
0. 3 - 0.8 mm
4
De-coilerÂ
Manual one, can load 5 tons raw material
5
Rollers  for formingÂ
9Â rows
6
Diameter of the roller
70 mm
7
Rolling material
Carbon  Steel 45#
8
Main motor p ower
4 kw
9
Productivity
8-1 2 m/min
10
Cutting method
Hydraulic mould cuttingÂ
11
Material of the cutting b la d e
Cr12
12
Hydraulic cutting powerÂ
3kw
1 3
Processing precision
Within 1.00mm
1 4
Control system
Delta PLC control
15
Side panel of machine
14mm
16
Main structure of the machine
300Â HÂ steel
17
WeightÂ
About 3.0T
18
Dimensions
5.5 *1. 45 *1.1 m
19
Voltage
380V 50Hz 3phases (changeable as needs)
20
CertificateÂ
CE/ISO /TUV
Â
Model NO.: CUS-SX-CRFM-900
Customized: Customized
Advantage: Use Widely
Condition: New
Usage: Manufacture Roof Sheet
Thickness of The Material: 0.3-0.8mm
Raw Material: Galvanized, Galvalume, Aluminum, PPGI
Control System: Siemens PLC Computer Control
Roller&Cutter Material: Cr12
Materials: Steel
Machine Frame Stand: Welded Structural Steel
Dimension: 7m * 1.2m * 1.5m
Voltage: 380V 3pH 50Hz (or as Buyer Request)
Number of Rollers: 11-18 Pairs
Trademark: CUS
Transport Package: Seaworthy Package
Specification: CE/ISO9001/SGS
Origin: China
HS Code: 8455229090