Bisphenol S Pink crystalline Powders has been frequently detected both in environment and biota,limited information is available on their effects of endocrine system. In the present study. As a substitute of bisphenol A (BPA), bisphenol S (BPS) has been applied in consumerproducts present in our daily lives. With a similar chemical structure as BPA, BPS has alsobeen demonstrated as an exogenous endocrine disrupting chemical.
Bisphenol S Pink Powders,95% Bisphenol S,Pink crystalline powder Jiangxi Hongjiu New Material Technology Co.,Ltd. , https://www.hongjiutech.com
Main Features:
-Tig &Â MMA welding modes.
-Portable, energy saving and high efficiency.
-Easy arc starting, small splashing, low noise, stable arc welding, great penetration, and aesthetic appearance of welding seam.
-Automatic compensaton for voltage fluctuations, can work against input voltage fluctuation.
-High efficiency and better energy-saving than traditional welder.
-DC TIG arc welding can be used to welding all kinds of metals, reasonable price with high quality.
Electric TIG Welding Equipment Specification
Model
TIG-200P AC/DC
TIG-250P AC/DC
TIG-315P AC/DC
Type
MOSFET
Rated input voltage (V)
single phase 220V±15%
three phase 380V±15%
Rated frequency (Hz)
50/60
Rated input current (A)
24
9.6
11.4
No-load voltage (V)
56
45
45
Output current (A)
10-160
10-250
10-280
Pre-flow time (s)
0-2
Gas delay time (s)
2-10
Duty ratio
20%-80%
Decay time (s)
0-5
Duty cycle (%)
60
No-load loss (W)
60
Arc starting
high frequency arc starting
Efficiency (%)
85
Power factor
0.93
Insulation grade
F
Protection grade
IP21
Net weight (KG)
23.4
31.2
31.2
Dimension of packing (mm)
625×400×505
625×400×505
625×400×505
Electric TIG Welding Equipment Accessories: earth clamp×1pcs, cable joint×1pcs, grounding cable×3meters, TIG torch×1set )
Electric TIG Welding Equipment Selection Guide
Material
Sheet thickness   (mm)
Tungsten diameter (mm)
Current range(A)
Model
 Carbon steel, stainless steel, low alloy steel
0.3-6
1.6-2.4
20-175
TIG-160
0.3-10
0.8/1.0
20-190
TIG-200
0.3-12
1.0/1.2
20-220
TIG-250
0.3-12
2.5-3.2
5-400
TIG-400P
Copper
0.3-14
2.5/3.2/4.0
5-500
TIG-500P
0.5-5.0
2.5-3.2
5-400
TIG-400P
0.5-60
2.5/3.2/4.0
5-500
TIG-500P
Carbon steel
Stainless steel
Low alloy steel
Aluminum1.5-5
2.5/3.2
5-200
TIG-200P AC/DC
1.5-5
2.5/3.2
5-250
TIG-250P AC/DC
1.5-5
2.5/3.2
5-315
TIG-315P AC/DC
Package &Â Shipping
Packaging Details:Â Â Carton package with inside plastic bag and foam /Â wodden packing/Packing according to customers requirements.
Delivery: within (25-30) days after confirmation of the deposit.
Company Information
    Zhejiang ST welding machine have a number of inventions and patents, cover IGBT module, single-tube IGBT, MOSFET three series of welding and cutting equipments.
    Continuous innovation, focus on the quality, integrity managements and common development are the pursuit of Zhongliang Group. To provide customers with high quality, reliable products and services are the eternal principle.
   Our products are widely used in chemical, construction, light industry, machinery manufacturing, shipbuilding, metallurgy, automobile manufacturing, aerospace and other professional fields.Â
 
 FAQ
        (Including pcbs with components, additional MOSFET/IGBT tube and components)
 Â
Contact:
Website:Â Â http://www.shunbian.cn/english/
Website On Alibaba:Â Â http://shunbian.en.alibaba.com/
Telephone:Â Â 0086-577-61679988
Fax:Â Â 0086-577-61679921
Mobile phone:Â Â +8615273363406
Â
Address:Address:Qiligang Industrial Park,Yueqing,Zhejiang,China. 325604
Electric TIG Welding Equipment TIG-250P AC/DC
Main Features:
-Tig &Â MMA welding modes.
-Portable, energy saving and high efficiency.
-Easy arc starting, small splashing, low noise, stable arc welding, great penetration, and aesthetic appearance of welding seam.
-Automatic compensaton for voltage fluctuations, can work against input voltage fluctuation.
-High efficiency and better energy-saving than traditional welder.
-DC TIG arc welding can be used to welding all kinds of metals, reasonable price with high quality.
Electric TIG Welding Equipment Specification
Model
TIG-200P AC/DC
TIG-250P AC/DC
TIG-315P AC/DC
Type
MOSFET
Rated input voltage (V)
single phase 220V±15%
three phase 380V±15%
Rated frequency (Hz)
50/60
Rated input current (A)
24
9.6
11.4
No-load voltage (V)
56
45
45
Output current (A)
10-160
10-250
10-280
Pre-flow time (s)
0-2
Gas delay time (s)
2-10
Duty ratio
20%-80%
Decay time (s)
0-5
Duty cycle (%)
60
No-load loss (W)
60
Arc starting
high frequency arc starting
Efficiency (%)
85
Power factor
0.93
Insulation grade
F
Protection grade
IP21
Net weight (KG)
23.4
31.2
31.2
Dimension of packing (mm)
625×400×505
625×400×505
625×400×505
Electric TIG Welding Equipment Accessories: earth clamp×1pcs, cable joint×1pcs, grounding cable×3meters, TIG torch×1set )
Electric TIG Welding Equipment Selection Guide
Material
Sheet thickness   (mm)
Tungsten diameter (mm)
Current range(A)
Model
 Carbon steel, stainless steel, low alloy steel
0.3-6
1.6-2.4
20-175
TIG-160
0.3-10
0.8/1.0
20-190
TIG-200
0.3-12
1.0/1.2
20-220
TIG-250
0.3-12
2.5-3.2
5-400
TIG-400P
Copper
0.3-14
2.5/3.2/4.0
5-500
TIG-500P
0.5-5.0
2.5-3.2
5-400
TIG-400P
0.5-60
2.5/3.2/4.0
5-500
TIG-500P
Carbon steel
Stainless steel
Low alloy steel
Aluminum1.5-5
2.5/3.2
5-200
TIG-200P AC/DC
1.5-5
2.5/3.2
5-250
TIG-250P AC/DC
1.5-5
2.5/3.2
5-315
TIG-315P AC/DC
Package &Â Shipping
Packaging Details:Â Â Carton package with inside plastic bag and foam /Â wodden packing/Packing according to customers requirements.
Delivery: within (25-30) days after confirmation of the deposit.
Company Information
    Zhejiang ST welding machine have a number of inventions and patents, cover IGBT module, single-tube IGBT, MOSFET three series of welding and cutting equipments.
    Continuous innovation, focus on the quality, integrity managements and common development are the pursuit of Zhongliang Group. To provide customers with high quality, reliable products and services are the eternal principle.
   Our products are widely used in chemical, construction, light industry, machinery manufacturing, shipbuilding, metallurgy, automobile manufacturing, aerospace and other professional fields.Â
Â
 FAQ
        (Including pcbs with components, additional MOSFET/IGBT tube and components)
 Â
Contact:
Website:Â Â http://www.shunbian.cn/english/
Website On Alibaba:Â Â http://shunbian.en.alibaba.com/
Telephone:Â Â 0086-577-61679988
Fax:Â Â 0086-577-61679921
Mobile phone:Â Â +8615273363406
Â
Address:Address:Qiligang Industrial Park,Yueqing,Zhejiang,China. 325604
Model NO.: TIG-250P AC/DC
Name: Electric TIG Welding Equipment TIG-250p AC/DC
Efficiency: 85%
Power Factor: 0.93
Protection Grade: IP21
Insulation Grade: F
Color: Black or as Required
Certificate: Ce
OEM/ODM: Available
Model: TIG-250p AC/DC Welder
Application: TIG Welding
Trademark: ST
Transport Package: Carton
Specification: 382*154*292
Origin: Zhejiang China
HS Code: 8515319900
Model NO.: TIG-250P AC/DC
Name: Electric TIG Welding Equipment TIG-250p AC/DC
Efficiency: 85%
Power Factor: 0.93
Protection Grade: IP21
Insulation Grade: F
Color: Black or as Required
Certificate: Ce
OEM/ODM: Available
Model: TIG-250p AC/DC Welder
Application: TIG Welding
Trademark: ST
Transport Package: Carton
Specification: 382*154*292
Origin: Zhejiang China
HS Code: 8515319900
Electric TIG Welding Equipment TIG-250P AC/DC    1. Q: Are you a factory or trading company?
        A: We are a factory; our main products are welding machine, and voltage regulator/transformer.    2. Q: How many days for mass producing?
         A: It will cost 30 days after confirm the order.    3. Q: Can you do OEM?
         A: Yes, we can do OEM/ODM.    4. Q: Will you provide spare parts?
        A: We will provide 2% free spare parts for our customers if the order no less than 20GP.    5. Q: What's your guarantee period?
         A: We offer 1 year warranty for our welding machine.    1. Q: Are you a factory or trading company?
        A: We are a factory; our main products are welding machine, and voltage regulator/transformer.    2. Q: How many days for mass producing?
         A: It will cost 30 days after confirm the order.    3. Q: Can you do OEM?
         A: Yes, we can do OEM/ODM.    4. Q: Will you provide spare parts?
        A: We will provide 2% free spare parts for our customers if the order no less than 20GP.    5. Q: What's your guarantee period?
         A: We offer 1 year warranty for our welding machine.