Steel-drawer
Model:XY-P80 XY-p120
Specification:
The Steel-drawer pull out the whole bar, the sidewall because of the role of the pull mouth,promoting rubber tearing, smoothly separate wire and rubber.
Advantages:
1.This equipment adopts double vane pump to supply oil, low working noise, at the same time to ensure the speed and pressure of the drawing cylinder when working, and improve the working efficiency and the service life of the valve.
2.The automatic lifting device is adopted to reduce the labor intensity of workers;
3.The inner guide rail positioning, make sensor reliability retractor positioning highly accuracy, drawing cylinder operation smoothly.
4.Using manual automatic exchange of work,flexible choice.
Automatic Feeding Machine
Model: XY-AL200 / XY-AL500 / XY-AL800 / XY-AL1200
Specification:
Automatic feeding machine mainly through the use of 60 tons of hydraulic pressure as the driving force, can be used to push scrap plastic/ tires with hydraulic column extrusion into reactor, the whole operation process is stable, simple and convenient.
Advantages:
Fully automatic design, save time and manpower;
Highly improve the feeding capacity: manually feeding can only reach 150-170KGS/m³. By using the automatic feeding machine, it could reach to 240-280KGS/m³, which greatly improve the feeding capacity.
Model: XY-C800 XY-C1200
Specifications:
The tyre cutting machine is applied to cut all kinds of rubber blocks and strips,it is good for cutting rubber tyre,rail tyre, rubber strips etc.
Advantages:
1.This machine with large cutting knife,good shearing effect,fast cutting speed and low energy consumption;
2.Small size, easy to move;
3.Adopt hydraulic system, easy to operate and very safe design.
The Whole Tyre Crusher
Model: XY-SH800 / XY-SH1200
Specifications:
At the room temperature, put the tyre or large plastics of rubber into the press directly,which can be crushed into 1-8cm pieces.
Advantages:
1.Compact structure, advanced technology, low energy consumption, high efficiency;
2.The crushing chamber is an open structure,which is convenient for maintenance;
The knife is made of hard alloy steel, which has high hardness, high wear resistance and can be used repeatedly;
3.This machine adopts the hardened reducer, round screen for structural steel wire mesh, large blanking area,which is good for qualified rubber material screening.
Tyre Steel Drawer,Automatic Feeder, Assistant Equipments Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com
Machine Specification
1. Mesh width and mesh opening can be customized.
2. Application: extensively used as fences for playground and gardens, highway, railway, airport, port, etc.
Technical Parameters
Max. weaving width
4m
Max weaving length
20m
Mesh opening
25-80mm
Wire diameter
2-4mm
Raw material
Galvanized wire, PVC Coated wire, etc.
Servo Motor
5.5 KW
Motor for side dealing
1.5 KW
Motor for parting tool
1.5 KW
Motor for winding
0.75 KW
Output
120 to 180 square meters/hour.
Electric system
1.Japan Mitsubishi PLC origin
2.Servo motorÂ
3.French Schneider (Low-voltage electrical system)Â
4.Electric &Â Machinery from Taiwan Teco Electronic
Control system
PLC automatic controller
Weight
3900kg
Dimension
Main machine: 6700*1430*1800mm
                         5100*1700*1250mm
1. Taiwan Delta Servo motor 5.5kw +Planetary Reducer (rate 1:3);
2. Original Japan Mitsubishi PLC + Touch  screen;
3. Alarm device +Â Emergency button;
4. Single mold, double spiral;
5. 12-procedure processed Straightening wheels;
6. Automatic mesh roller;
7. Three ways of mesh sides
8. Schneider Low-Voltage electronics.
Machine Pictures
   
   Â
Commercial Terms
1. Payment: 30% T/T in advance, the balance 70% by T/T after checked the machine at seller's factory before shipping.
2. Minimum order quantity: 1Â setÂ
3. Certification: ISO 9001 Certificate
5. Delivery time: 30 days from received your payment in advance.
6. Guarantee period:Â 12 months after the equipment is accepted by the buyer, however, the guarantee period is no longer than 18 months after equipment's departure from Xingang port,
China.
8. Installation: we could arrange our engineer install the machine in your factory.
Certification
  
Factory Show
Model NO.: DP 25-80
Feeding Way: Single Mold, Double Spiral
Electronics: Mitsubishi PLC Controller and Schneider
Touch Screen: Taiwan Weinview
Motor: Delta Servo Motor and Planetary Reducer
Trademark: JIAKE
Transport Package: Wooden Pallet and Plastic Package in Container
Specification: CE
Origin: Hebei, China
HS Code: 8463300000
Galvanized Diamond Wire Mesh Netting Machine