Other Ducts And Fittings,Double Row Supply Grille,Double-Row Ventilation Grille,Return Air Grille YANTAI DONGTAI STANDER OFFSHORE ENGINEERING CO.,LTD , https://www.dongtaicolumbus.com
Product Description
 Filling Line Basic Specifications:
Â
Product
Bottle Carbonated Drink
Temperature of filling
3~5Â Degree
Viscosity of product
Free flow
Capacity
500 ML Volume Bottle 3,000CANS PER HOUR
Type of Bottle
PET bottle on volume 500ml
Type of Cap
Plastic screw on caps 28mm in diameter PCO28
Type of Label
PVC Labels(Shrink Sleeve Labeling Machine)
Type of Packaging Style
PE Film Shrink PackagingÂ
500Â MLÂ BOTTLESÂ Â PACKINGÂ (3X4Â =12)Â BOTTLES
Voltage
380V/60Hz/3Â Phase
220V/50Hz/Single Phase
Ancillary
24AV/DC
The bottle enters into the rinsing part of three-in-one machine by air conveyor. The gripper installed on
the rotary disk catches bottle and turns it over 180 degrees and makes the bottleneck face ground. In the
special rinsing area, the nozzle on the clip sprays water to rinse bottle inner wall. After rinsing and draining,
the bottle turns over 180 degrees along the guide rail and make the bottleneck faces sky. Then rinsed bottle
is transferred to the filling part through poking bottle star-wheel. The bottle that enters into the filler is
hold by neck holding plate. The filling valve acted by the cam can realize up and down. It adopts pressure
filling way. The filling valve opens and begins filling when it moves down and touches the bottleneck, the
filling valve move up and leave the bottleneck when it finishes filling, the full bottle is transferred to the
capping part through hold neck transition poking wheel. The stop screwing knife holds the bottleneck,
keeps bottle upright not rotating. The screw capping head keeps in revolution and autorotation. It can
finish a whole capping course including catching, pressing, screwing, discharging through the action of the
cam. The full bottle is transferred to bottle outlet conveyor to the next process through poking wheel. The
-whole machine is enclosed with windows, the height of enclosed window is higher than the peak of the 3 in 1 machine, in the bottom of the enclosed window has return air outlet
Bottle inlet structure
 Adopt air conveyor system with high efficient filter to feed bottle, this can keep the inside of the filling machine clean
With bottle neck holding in the whole course and protect bottle block device.
Â