Deformed Steel Bar,Steel Rebar,Galvanized Rebar Steel,TMT Steel Bar Shandong Yiyuantong International Trade Co., Ltd. , https://www.yyttrade.com
Components of whole set sanwich panel machinery:
Roll forming mahine and Sandwich panel press machine
Detailed specification of whole set sandwich panel machine:
Introduction:
Sandwich panel line is a compound line, contain roll forming machine and sandwich panel rolling system. The whole line is controlled by the PLC control center.
The material is steel sheet coil, its thickness can be 0.4-0.6mm, width can be 1250mm, the hydraulic strength ≤ 235MP. The stuffing is EPS or Rock Wool.
Technical Parameters:
Sandwich panel size:
Length: ≥ 2m
Width: ≤ 1250mm
Thickness: As per the drawing
2. Steel sheet coil size:
Thickness: 0.4mm-0.6mm
Width≤ 1250mm
The max weight: 5T
Inner diameter of coil: 500mm and 600mm
Outer diameter of coil: 1000mm
3. Stuffing material: EPS
Density≥ 18/m3, tolerance of straight≤ 1/m, arched tolerance≤ 3/m, Level tolerance≤ 1.5mm, EPS panel length≥ 3m.
4. Stuffing material: Rock wool
Density≥ 100/m3, Rock wool panel length≥ 3m.
5. Processing speed: 1000-3000mm/min (The speed can be adjusted)
6. The length of the whole line: 40m
7. The available Length of sandwich panel: 7.5m
8. Control center: PLC
9. Power of main motor: 40kw
10. Power source: 380V/3phase/50 Hz
11. Air pressure: 0.7MP (you can control by yourself)
12. The best working temperature: 25oC.
13. Material of roller: C45steel hard chrome plating
14. Material of blade: Cr12
We also can design and manufacture as per your request!
Advantage of our sandwich panel construction machinery High quality Lower cost Durableness High efficiency Reliable working Low failure rate Low energy consumption Trouble free after sales service
Model NO.: HKY-CONSTRUCTION MACHINERY
Trademark: HKY
Specification: 40*1.5*2.5M
Origin: China
HS Code: 845522
Eps 3d panel production line, foam EPS Sandwich panel construction machinery, sanwich panel line, sandwich panel making machine, insulated panel machine