Portable Diesel Electrical Screw Air Compressor
Portable Diesel Screw Air Compressor
A compressor can be used to power a variety of jobs such as inflating tyres or operating a nail gun at home or in a workshop. Portable air compressors are good for light, quick jobs as they tend to have a smaller tank with a handle and wheels to make them easy to movement. The size of the tank will determine how much air is stored and therefore how long it will run so if you are using tools that require a high volume of air for longer, then you should consider a larger tank.
The energy contained in the compressed air can be used for a variety of applications, utilizing the kinetic energy of the air as it is released and the tank depressurizes. When tank pressure reaches its lower limit, the air compressor turns on again and re-pressurizes the tank. An air compressor must be differentiated from a pump because it works for any gas/air, while pumps work on a liquid.
It mainly used in a lot of drilling fields, such as Water Well Drilling Rig in rocky layer,DTH Drilling Rig in rock works,underground jumbo drilling rig,percussion drilling piling rig,Core Drilling Rig in geological investigation and so on.
Our power-driven portable rotary screw air compressors can meet different demands. Several main advantages of our portable compressors include high reliability and adaptable.
Dth Drilling Air Compressor,Portable Diesel Screw Air Compressor,Customized Drilling Rig Air Compressor,Underground Drilling Site Air Compressor Henan YK Prospecting Machinery Co., Ltd , https://www.yyboreholedrilling.com
2. It is easy to vaporize, easy to condense, toxic, flammable, explosive, non-magnetic material, fiber and wear material, and non-corrosive fluid in stainless steel, medium and small flow measurement, when local indication or remote transmission signal is needed, The use of common metal tube rotor flowmeter 3, when the measured medium is easy to crystallize or vaporize or high viscosity, can be used with a jacketed metal tube rotor flowmeter. Pass the heating or cooling medium in the jacket.
4. When the measuring medium is corrosive, an anti-corrosion metal tube rotameter can be used.
5. Installation of rotameter The rotameter requires vertical installation and the inclination is not more than 50. Most of the fluids are from the bottom up. Special metal tube rotameters can be connected horizontally. The installation location should be less vibrating and easy to observe and maintain. It should be provided with downstream shut-off valves and bypass valves. For dirty media, a filter must be added at the inlet of the flowmeter.
1, small and medium flow, small flow. The glass rotor flowmeter can be used for local indication of the fluid flow with less than 1 MPa pressure, clean and transparent, non-toxic, non-toxic and non-adhesive glass flow rate below 100°C.