Water/Wet type wire drawing machine LT23-25/288 water tank wire drawing machine Water/Wet Type Wire Drawing Machine,Water Type Wire Drawing Machine,Wet Type Wire Drawing Machine,Water Tank Wire Drawbench Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com
1. This is a machine especially for making compression spring.
2. It is new in design, stable in operation. Precise in the products it make.
3. The servo motor of it is imported from Japan and we introduce the most famous yitu computer control system from Taiwan.
4. With function of graphics system, only need to input the relative parameters, the wire diameter, the number of turns and wire diameters etc., then the program will be generated automatically in the computer
5. With fuction of camera spring length gauge, the spring will be amplifying and showed on the computer, it can help you to control the length accurate
1. This is a machine especially for making compression spring.
2. It is new in design, stable in operation. Precise in the products it make.
3. The servo motor of it is imported from Japan and we introduce the most famous yitu computer control system from Taiwan.
4. With function of graphics system, only need to input the relative parameters, the wire diameter, the number of turns and wire diameters etc., then the program will be generated automatically in the computer
5. With fuction of camera spring length gauge, the spring will be amplifying and showed on the computer, it can help you to control the length accurate
(1) Main technical parameters:
1. Maximum incoming line strength: ≤ 1400Mpa;
2. Drawing passes: 23, 25;
3. Maximum incoming wire diameter: 1mm;
4. Minimum outlet diameter: 0.1-0.12mm;
5. Maximum drawing speed: 15m/s;
6. Average pass compression ratio: 14%;
7. Motor power: 15-18.5kw.
(2) Equipment composition for wet wire drawing machine
1. The frame is formed by welding section steel, and the tank body is formed by welding stainless steel plate;
2. The tower wheel is made of 45 steel, the working surface is sprayed with tungsten carbide powder (WC), the surface hardness is ＞ HRC60, the surface finish is 0.4Ra, and the service life is more than two years;
3. The machine coefficient is large in the front and small in the rear, which is conducive to improving production efficiency and continuous production;
4. Both the mold base and the mold base have angles, and the steel wire is always in a straight line during drawing, which is conducive to improving the quality and not easy to break the wire;
5. Tower wheel and mold are cooled by immersion in self circulating lubricating coolant;
6. The transmission mode is driven by synchronous belt to eliminate oil leakage and reduce noise;
7. The main bearings are made of NSK brand from Japan, and the motors are frequency conversion motors;
8. The finished product mold is installed in the mold base that can adjust the angle, which is conducive to the alignment of the finished product reel and the adjustment of the product ring diameter;
9. Box overturning force ≤ 200N;
10. All wire passing wheels and rollers are subject to quenching treatment, with surface hardness ＞ HRC50;
11. AC frequency conversion speed regulation is adopted, and the frequency converter adopts Siemens or Huichuan brand;
12. The electric control mode is PLC control, and the PLC is made of Mitsubishi or Siemens;
13. The touch screen is Taiwan made color touch screen, and low-voltage electrical components are all domestic well-known brands;
14. The machine is equipped with inching, front and rear linkage, start, stop and other functions. The human-machine interface of the main operating console has the functions of length, speed preset display, fault query, and equipment status display;
15. The electric cabinet is a standard cabinet produced by professional enterprises.
Model NO.: KCMCO-KCT-660
Type: Cnc Bending Machine
Total Power: 33.6kw
Axes Count: 6
Wire Size Range: 2.5~6.0mm
Max Feeding Speed: 1~60PCS/Min
Feeding Axes Count: 3 Pairs
Max Feeding Length: Unlimited
Dimension(L*W*H): 1659*1455*2000mm
Weight: 4800kg
Power AC: 3~380V50Hz
Trademark: KCMCO
Transport Package: Vacuum Packing& Standard Wooden Case
Specification: CE
Origin: China
HS Code: 84633000
Model NO.: KCMCO-KCT-660
Type: Cnc Bending Machine
Total Power: 33.6kw
Axes Count: 6
Wire Size Range: 2.5~6.0mm
Max Feeding Speed: 1~60PCS/Min
Feeding Axes Count: 3 Pairs
Max Feeding Length: Unlimited
Dimension(L*W*H): 1659*1455*2000mm
Weight: 4800kg
Power AC: 3~380V50Hz
Trademark: KCMCO
Transport Package: Vacuum Packing& Standard Wooden Case
Specification: CE
Origin: China
HS Code: 84633000