Plastic Flowmeter is a widely used instrument in water treatment engineering, mainly used for flow detection, usually installed after the water pump, to control the water intake of each structure, currently the most widely used are electromagnetic flowmeter and ultrasonic flowmeter.
In the selection of the flowmeter, the first thing to consider is the corrosiveness of the measured medium to the flow-passing parts, so as to avoid affecting the service life of the flowmeter due to the corrosion of the medium;
During the design and installation process of the flowmeter, the length of the straight pipes before and after the flowmeter needs to be considered. Usually, the principle of 5D before and 3D after the flowmeter is followed. Here, D is the inner diameter of the pipe. If the length is insufficient, the measurement accuracy will be affected. When using an ultrasonic flowmeter, the distance between the first 10D and the rear 5D must be met, and the distance from the flowmeter to the water pump must be more than 30D.
When selecting the type, the flow rate of the medium in the pipeline needs to be between the maximum value and the minimum value of the selected flowmeter, and avoid approaching the maximum or minimum value, so as to avoid affecting the measurement accuracy.
Plastic Flowmeter,Acrylic Flowmeter,Solenoid Valve,Liquid Filled pressure gauge Hebei Chengda Water Technology Co.,Ltd. , https://www.arclion1976.com
Heavy duty, reversing drum, mechanically fed concrete mixer manufactured to the highest specification
Strong feed hopper pulled by steel dragline
Towable chassis with two pneumatic tyred wheels
Jacking system allows wheel removal for storage during long term use
Durable water pump
Long life gear wheel and big extra thick stee drum
High performance electric motor
The reversing drum mixers are known for the extremely low maintenance and operating costs, yet a good mixing effect relative to other drum mixers.
Model NO.: JZC-350E
HS Code: 84743100
This item is a reversing drum mixer. A reversing drum mixer (also commonly called a non-tilting mixer) is a type of concrete mixer that produces concrete in single batches. The entire drum rotates around its axis as materials are loaded through a charge chute at one end of the drum and exit through a discharge chute at the opposite end of the drum. Its advantages are convenient operation, good mixing quality and high productivity ect. And it is the ideal machines for construction fields, road, bridge project and all kinds of concrete parts factory.