Precipitated Barium Sulfate,White Powder Precipitated Barium Sulphate,Precipitated Barium Sulphate Baso4,Raw Material Precipitated Barium Sulphate Shenzhou Jiaxin Chemical Co.,Ltd , https://www.jiaxinbaso4.com
Led electronic screens are often used outdoors, on stage, etc. Large-scale programs require extremely large stage screens. Many stages need to be temporarily constructed. Here are several ways to introduce led display brackets. Probably for the bracket production, simple frame production, stainless steel production.
1, bracket production: According to different applications, the frame requirements are not the same, we first talk about embedded installation, do not need the frame, but need a mounting bracket. The mounting bracket is generally made of aluminum, which is light and easy to cut and process. We can also use universal angle iron (a right-angled iron bar with many holes). We can see the installation of copper pillars on the back of the unit board. It is used to fix the unit board in the bracket. The bracket should be longer and set the mounting hole of the light box. The unit board, the control card, and the power supply are all fixed to the bracket. The data cable and the 220V power cable should be tied to the bracket. It should be tied and knotted. Such a simple screen is assembled. Can be mounted on other devices such as light boxes.
2, simple box production process: We see the unit board bought back, will find the brightness is different, or the application may have water, this time you need to paste a plexiglass in the screen surface, plexiglass generally use brown, or dark Red. Plexiglass can be purchased in advertising and decorating materials stores, and it is bought on a pound basis. We use thin, thin and may be easily bent. It needs to be reminded that since the cutting of plexiglass requires skill, it is best to buy the size and prepare the size so that the shop can cut it for you. For the general situation, a box is needed. We can use aluminum alloy profiles (for example, hollow aluminum bars with a square cross-section). We can go to the aluminum alloy profile shop. If the aluminum alloy frame is used, if the screen is very small, the unit board can be directly fixed to the outer frame. If the strength is sufficient, the bracket is not needed. Specific frame production process, can refer to the production of light boxes.
3, stainless steel frame production process: We can see that many LED display screen frames are stainless steel. In fact, the outer frame of stainless steel is based on a simple frame and is covered with a thin layer of stainless steel. Looks beautiful, generous and adds value. As for the flow of the package box, it is necessary to use a folding machine. We can go to the hardware factory that manufactures the kitchenware and substitute it for processing. It is best to go to a professional LED frame shop. The biggest difference in specialty stores is the small seams that make up the edges.
Each kind of frame is aimed at a different environment. The selection of the bracket will affect the use of the entire screen, and it will be more dangerous and safe. Therefore, when making the appropriate choices, you need to fully plan and do not choose at will.