Stainless Steel Cut Wire Shot 0.15mm Stainless Steel Shot is a popular Metal Abrasive which is used on die casting parts for surface treatment. Generally, using Stainless Steel Shot when blasting have many advantages. For example, it could decreasing the dust when shot blasting. It has a great effect on strengthen the surface of parts and even it could make parts rust resistance. More important, it could make parts to have a matte surface. Generally, the smaller the size of Stainless Steel Shot is, the finer and smoother of parts is. Stainless Steel Cut Wire Shot 0.15Mm,Stainless Steel Cut Wire Shot Specification,Stainless Steel Cut Wire Shot Minimum,Sus301 Stainless Steel Cut Wire Shot 0.15Mm Longlived Metal Products Co ., Ltd , https://www.longlivedmetalproducts.com
At present, there is an axis shift of 3 to 10 mm for more than 80% of the total number of rod pumping wells in Gudong Oil Production Plant, which may cause seal failure in the production process. In order to ensure the sealing, the packing pressure must be increased, which in turn causes the packing to wear unevenly, which causes the sealing failure of the entire set of packings, resulting in the frequent replacement and fastening of the packing and the leakage of the wellhead. To this end, the production of four oil mining technicians developed a new wellhead polished rod sealing device, that is, follow-up to the wellhead sealing device. The device is designed to follow the structure of the sealing portion of the sucker rod, completely eliminating the offset of the axis of the polished rod, prolonging the service life of the packing, reducing the leakage pollution at the wellhead, and achieving good power-saving effect. At present, the plant has applied 50 sets of the device on site, with an energy saving rate of 3.86%, an average service life of more than 6 months, and an annual increase of 155,000 yuan.
Through the development of Longlived Metal Products CO., LTD technology , we have research and development the 0.15mm 410 Stainless Steel Shot. Compared with Cast Stainless Steel Shot, it has a greater surability. It has a very excellent effects on surface treatment.
The follow-up sealing device in the middle wellhead, which was recently developed and promoted in Gudong Oilfield No.4 Mine, Lili Oilfield, has a good power-saving effect and can solve the problems such as pollution caused by the frequent failure of the oil wellhead seal.