Recently, the 2017 Rubber Industry Frontier Technology Forum was held in Tongling City, Anhui Province.

Sumitomo Rubber (Changshu) Co., Ltd. participated in the forum and gave a speech on the theme of “Discussion of Waste Gas Treatment Plan for Tire Factory”.

Zhu Haifeng, chief engineer of the Sumitomo Rubber Changshu plant, said that Sumitomo Rubber will continue to increase investment in waste gas under the increasingly stringent national emission standards.

It is reported that the plant plans to invest 42 million yuan in the vulcanization section on the existing basis, and an additional investment of 17 million yuan in the finished product warehouse to better control the exhaust emissions.

In addition, Sumitomo Rubber will introduce an online monitoring device to gradually promote intelligent control.

As of 2017, the total investment in the waste gas treatment of the Sumitomo Rubber Changshu plant will increase to 94 million yuan and the total operating cost will be 26.4 million yuan.

According to reports, since 2012, Sumitomo Rubber Changshu Plant has carried out various targeted tests to strengthen the effect of waste gas treatment. It has invested more than 35 million yuan for the treatment of odors in mixed sections. The annual operating cost of various processing devices is about 16 million yuan.

Zhu Haifeng said that "green production" is a problem that tire manufacturers must face. The value of Sumitomo Rubber Waste Gas Treatment will be fully presented in the future.

Ti3SiC2

[Product Description] : Titanium silicon carbide ceramic powder is prepared by sintering Ti, Si, C powder mixture by high temperature plasma, after mechanical crushing and inert gas grinding.

[Packaging specifications] : fixed packaging 5/10/50/100/500g, or according to customer requirements for packaging;

[Intended use] : used for chemical etching to prepare MXenes, physical and chemical experimental research needs;

[ Basic Information ] :

1. Chemical formula: Ti3SiC2

2. Constituent elements: Ti, Si, C

3. Molecular weight: 195.69

4. Chemical status: particles of micro and nano size

5. Appearance and character: dark brown particles with micro and nano size

[Product performance indicators] :

1. Crystal structure: Hexagonal, P63/ MMC [194]

2. Cell parameters:

A =3.06879 A, B =3.06879 A, C =17.67326 A;

α=90, β=90, γ=120;

3. PDF No.:48-1826 (refer to International Diffraction Data Center PDF-2004 database);

4. Density: 4.53 (g/cm3);

5. The boiling point:

6. Melting point:

7. Flash point: meaningless;

8. Purity: --;

[Storage conditions and validity]

This product should be stored in room temperature and dry place, avoid contact with acid, alkali and other liquids, long-term storage will happen slow oxidation.

[ Test Method ]

This product can be confirmed by X-ray powder diffractometer crystal results; Element composition was confirmed by energy dispersive X-ray detector. The same morphology characterization was used to characterize the particle morphology. The particle size distribution was evaluated by laser particle size analyzer.



[Safety protection]

1. Health hazards

Hazardous category: Non-hazardous chemical chemical category: ceramic powder;

Route of invasion: inhalation, ingestion;

Health hazards: dust in the eye has irritation, oral stimulation of gastrointestinal tract;

2. First aid measures

Skin contact: Remove contaminated clothing and rinse skin thoroughly with running water.

Eye contact: lift eyelid and rinse with plenty of running water or normal saline for at least 15 minutes;

Inhalation: Get away from the scene to fresh air quickly;

Ingestion: drink enough warm boiled water, induce vomiting, seek medical advice;

3. Ignition and explosion characteristics and fire protection

Flammability: non-flammable;

Ti3Sic2 Powder,Ti3Sic2 Black Powder,High Electrical Conductivity Ti3Sic2,Titanium Silicon Carbide

Jilin 11 Technology Co.,Ltd , https://www.11techmxene.com