6300 Series Deep Groove Ball Bearing
Deep Groove Ball Bearing are simple in design, non-separable, suitable for high and even very high speeds and are robust in operation, requiring little maintenance.
Deep-groove bearings have higher load ratings for their size than shallow-groove , but are also less tolerant of misalignment of the inner and outer races.
They are suitable for precision instrument, low noise electromotor, automobile and motorcycle, etc. It is the the most widely used bearing type.
6300 Series - Medium Series Ball Bearings – Ideal for heavier load capacity
Our Advantages:
1. More than ten years bearing products exporting experiences.
2. OEM order and Non-Standard Bearing order can be accepted.
3. Many sizes of bearing are available. Large quantity bearing can be provided.
4. To respect customers, you can choose the loading port.
5. A certain number of free sample can be provide to support our customer's after-sale services and warranty.
Product Photos:
Packing:
1 Industry package: 200pcs/plastic bag, 2000pcs /carbon , 50 cartons/pallet ,
Packing Photo:
Workshop:
Shippment:
Exhibition:
6300 Series Deep Groove Ball Bearing 6300 Series Deep Groove Ball Bearing,6300 Radial Ball Bearing,6300 Series Metric Ball Bearing Hebei Naimei Bearing Co., Ltd. , https://www.nmn-bearing.com
1. The dome is powered on, no action, no image, and the indicator is off. Check if the power cord is connected incorrectly. If the connection is incorrect, connect the power cord according to the correct method. Check whether the power supply is damaged: If the power supply is damaged, replace it to ensure that the power supply is not damaged. Check if the fuse is damaged: If it is damaged, replace it to ensure that the fuse is not damaged. Check the power cord for poor contact: If it does not contact properly, reconnect the power cord or replace the power cord.
2, the power self-test, an image can not be controlled check ball machine address code, baud rate setting is wrong: Set if any error codes that matches the address and baud rate. Check whether the protocol settings are correct: If yes, set the corresponding protocol. Check whether the RS485 control cable is connected correctly: If it is incorrect, connect it according to the correct method.
3, self-test can not be carried out, there are images but accompanied by noise testing whether mechanical failure: Please correct the mechanical structure of the dome, such as the camera tilt please correct. The power may not be enough: Please replace the power supply that meets the requirements and try to place the switching power supply near the dome.
4ã€Unstable image Replace the qualified video cable to check if the video cable is in poor contact. The power may not be enough: Please replace the power supply that meets the requirements and put the switching power supply near the dome.
5, the screen blur may focus on the manual state, control the dome or call any preset position, the dome can resume auto focus. The transparent cover is dirty and the transparent cover is cleaned.
6, the control ball machine stop or delay the inspection control dome farthest matching resistance is added, if not added in the remote control unit from the ball, join matching resistor. The power may not be enough: Please replace the power supply that meets the requirements, and place the switching power supply near the dome. 
2 Tube Package: 10PCS/tube,then put in Carton and Pallet
3 Single Package: 1PC/single box, then put in Carton and Pallet
And also we can pack according to your requirement.
The dome on the market is also more widely applied, but the use of the process there will be at fault, the following gave you share it!