Automatically complete all the processes of the accommodation handle of the zipper pull head, fully automatic zipper feeding, injection molding, removing the zipper head, separating the water-free port, and obtaining the final product.
1. Automatic tape feeding and rewinding are formed in one piece. 2. The molding length is adjustable, and the range is wide. 3. The zipper head and tail end are automatically switched at one time.
Zipper Injection Machine,Silicone Product Injection,Nose Pad Injection Equipment Changzhou Yuehai Zanyang Machinery Sales Co., Ltd. , https://www.zanyangmachine.com
According to the adjustment procedures of the temperature transmitter and other instruments, it is necessary to make periodic adjustments. In accordance with the following steps, check the instrument calibration error.
First open the instrument panel and click on the "Power of the image. The initial resistance adjustment box, the termination condition of the 100Ω input of the first circuit, the rest of the input short circuit cycles.
The second resistor is set to adjust the W12157.31Ω, so that 20mA output (2), adjust the potential 4mA output W11, step, until a good accuracy range, always repeat.
The third standard sheet resistance is output to 20mA and 4mA, so as the second cycle, adjust the next two adjustments to fit the full meter W22 on the second road, and the zero potentiometer W21, the short circuit must be input to the rest of the circuit.
The fourth standard resistance box repeats step 2 and obtains the third and fourth cycles.
The integrated temperature transmitter does not need to be adjusted, but taking into account various factors in the use of the process, proper adjustment of the integrated temperature transmitter is very necessary.