According to the company's arrangement, non-explosion-proof cameras will be used underground in Pingshu Company. In order to ensure smooth operation, the following safety measures are formulated.

1. The location of the underground shooting must be carried out according to the prescribed route. Before the shooting, adequate preparations should be made to organize the shooting equipment.

2. Before the filming, the construction unit must arrange the environment of the construction site. At the same time, the air duct is connected to ensure that the gas does not exceed the limit. The shooting location should be connected to the ventilation dispatching room and ensure the communication is smooth. Before the camera personnel enter each camera area, they must first ask the dispatching room whether the current gas and other conditions in the area allow non-explosion-proof equipment to enter. After that, the inspectors of the area must be accompanied by the whole process, and the gas condition should be checked at any time. Once the gas exceeds 0.5%, the area is immediately withdrawn.

3. The underground construction site will arrange a special person to prepare two fire extinguishers.

4. All shooting locations are inspected by the on-site construction department for adequate watering and dust removal before shooting.

5. Before shooting, the flammable and explosive materials should be cleaned within 20 meters of the shooting site, and the location of inflammable materials cannot be removed. It must be fully sprinkled within 20 meters.

6. When shooting, the photographer should not shoot at random, and shoot outside the permitted range. The shooting point must be away from combustibles.

7. The shooting equipment must be designated by a special person to manage the touch points of the flash before shooting.

8. When shooting downhole, the shooting of each point should be carried out in order, and no more points can be taken at the same time. Each work site must be shot intensively when shooting, and the one-time shooting is completed.

9. The shooting lane, diverticulum or working surface must be well-maintained. When shooting, the shooting area stops all work unrelated to shooting.

10. During the downhole shooting process, the ventilation dispatch room must be reported before each transfer point.

11. All photographers are not allowed to touch the handles of the switch and power supply along the way, and it is strictly forbidden to shoot near the switch and power supply.

This measure does not mention the place in strict accordance with the "coal mine safety regulations" and the relevant provisions of the company.

2 Ton Electric Stacker

1. Multifunctional handle
The multifunctional handle is imported from Germany. It has integrated control functions including a speed button, horn button, emergency reversing button and lifting button. The handle has an emergency reversing button which can effectively protect the operators from being hurt in accident involving falling items. The handle can realize braking both in vertical and horizontal position. The human-machine design is quite safe and the operation is more comfortable.

2. Strong power
This stacker adopts high efficiency motor which can be precisely controlled and the output power is strong. The turning control can be optionally equipped with EPS. It can help the driver with turning by using electronic control device to produce auxiliary power of relative level and direction according to the torque signal and speed signal. So the operation of the driver can be more convenient and precise and the movement can be more stable and reliable.

3.Superior gradeability
The powerful motor and 5 wheel stacker structure can provide superior stability and gradeability, so that the truck can have sufficient gradeability when it is fully loaded.

4. Buffered pedal
The foldable pedal can save space when the stacker is not in use. It can also effectively protect the drivers from being effected by the bumping and give feedback to the driver with the road condition.

5. Dual balance wheel device
This stacker is equipped with a dual balance wheel so that it can overcome roadblocks easier and the running can be more stable.

6. Emergency power-off switch
The power can be rapidly cut off in emergency to ensure safety.


Electric Stacker, or walkie stacker, is an industrial device for loading and lifting pallets on a shelf at high level. As an ideal choice to operate in narrow space of warehouse, it can be widely used in petroleum, chemical, pharmaceutical, textile, pigment, coal and other industries, as well as ports, railways, freight yards, warehouses.


Compared with the traditional manual stacking, Zowell full electric stacker maintains great advantages in safety, efficiency and cost. In addition to durability and accuracy both outside and inside, Zowell XE electric stackers are also equipped with mast with clear view, double speed and lateral vertical moving switch, which are valuable when working in limited space.

The standard load capacity of XE series ranges from 1 ton to 2 tons, two driving modes: walking and standing driving. If you need bigger capacity or other customized options such as rod, low mast, grabbling frame, please contact us so that we can provide you best solution with professional knowledge.


Full Electric Stacker,Electric Stacker Truck,Electrical Stacker,Electric Stacker Lifter

Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com