12m Length Shearing Machine with Automatic Feeding Used to Shear Truck Bottom Beam Plate (ZS-QD11K-20× 12000)

CNC Shearing Center
Model ZS-QD11K-20×12000



Main parts and Performances:
1. Sheet preparation carriage
- Driving by motor, frequency converter and CNC system
2. Electro magnetic chuck loading mechanism
- Autofeed by electro magnetic chuck
3. Front feeding system
- With hydraulic clampers driven by servo motor, ball screw, linear guide rail and CNC system to ensure the precise positioning
- Three units clampers (X1,X2,X3) can meet 2000-12000mm length sheet requirements. Each clamper is controlled separately.
- Inclined cutting is available
- Floating clamper to avoid the plate camber deviation
- Setting side stopping columns to position the plate longitudinally  
4. Plate end turnover mechanism
- Plate trimming shear by plate end turnover mechanism to ensure max. plate utilization
- Turnover length 2000---12000mm, width less than 500mm
5. Main shearing machine
- Hydraulic guillotine shear
- Three points rolling guide rail clamping supporter structure
- Cr12MoV blade
6. Back supporter
- Receiving plate cut and scrap
- Blanking
- Turnover
7. Back stacking and discharge carriage
8. Integrated hydraulic valve block
9. Electrical system
- Bus control technology with real running monitoring, auto failure alarm and on-line diagnosis function


Cutting plate specification and material:
Ram material plate size and technical requirement

Name	Technical requirement
Plate thickness	2~20mm
Plate Tensile Strength	≤450MPa
B Plate width	600mm≤B≤2500mm
L Plate length	2000mm≤L≤12000mm
Plate depth of camber	≤20mm
Plate delivery condition	trimming

 

After cutting plate size and precision

Data	Requirement
Cutting width deviation	±1mm
Cutting remains width	≥120mm
L cutting length	2000mm≤L≤12000mm
Cutting straightness	        0.25mm/1m,

Technical Specifications

Thickness(mm)	20
Length (mm)	12000
Shear angle(°)	0.5-2.5
Strokes(n/min)	4--10
Height from table to floor (mm)	700
Motor power(kw)	55kW*2
Working pressure of hydraulic system (MPa)	23

Main configuration:
Main electric components - Schneider
Frequency converter, servo motor - YASKAWA, Japan
CNC system - Siemens
Stroke switch - Omron
Oil pump - NACHI, Japan
Hydraulic valves - Huade, Beijing
Ball screw - Hiwin, Taiwan
Poswer supply - 380 Volts/3 Phases/50Hz
 
Options
- Side shear

Packing: Coating with anti-rust oil on working surface, with plastic film layer for whole machine. Packed in  container and iron cases 

After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
    management system in our company and on our products.
   All products before ex-works have been strictly tested and are in conformity with technical agreement and
   standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
    could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
    to guide the installation, testing and training the operators from 7 days to 45 days after the machine  
    reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
   (USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
    included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
    firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
    free to contact the Seller.  
    If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
    service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
    which is helpful for customers'  special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
    long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
    failure description, clear pictures and videos, if possible.
    Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
    B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
    service at lowest cost. 


 

CNC Shearing Center
Model ZS-QD11K-20×12000



Main parts and Performances:
1. Sheet preparation carriage
- Driving by motor, frequency converter and CNC system
2. Electro magnetic chuck loading mechanism
- Autofeed by electro magnetic chuck
3. Front feeding system
- With hydraulic clampers driven by servo motor, ball screw, linear guide rail and CNC system to ensure the precise positioning
- Three units clampers (X1,X2,X3) can meet 2000-12000mm length sheet requirements. Each clamper is controlled separately.
- Inclined cutting is available
- Floating clamper to avoid the plate camber deviation
- Setting side stopping columns to position the plate longitudinally  
4. Plate end turnover mechanism
- Plate trimming shear by plate end turnover mechanism to ensure max. plate utilization
- Turnover length 2000---12000mm, width less than 500mm
5. Main shearing machine
- Hydraulic guillotine shear
- Three points rolling guide rail clamping supporter structure
- Cr12MoV blade
6. Back supporter
- Receiving plate cut and scrap
- Blanking
- Turnover
7. Back stacking and discharge carriage
8. Integrated hydraulic valve block
9. Electrical system
- Bus control technology with real running monitoring, auto failure alarm and on-line diagnosis function


Cutting plate specification and material:
Ram material plate size and technical requirement

Name	Technical requirement
Plate thickness	2~20mm
Plate Tensile Strength	≤450MPa
B Plate width	600mm≤B≤2500mm
L Plate length	2000mm≤L≤12000mm
Plate depth of camber	≤20mm
Plate delivery condition	trimming

 

After cutting plate size and precision

Data	Requirement
Cutting width deviation	±1mm
Cutting remains width	≥120mm
L cutting length	2000mm≤L≤12000mm
Cutting straightness	        0.25mm/1m,

Technical Specifications

Thickness(mm)	20
Length (mm)	12000
Shear angle(°)	0.5-2.5
Strokes(n/min)	4--10
Height from table to floor (mm)	700
Motor power(kw)	55kW*2
Working pressure of hydraulic system (MPa)	23

Main configuration:
Main electric components - Schneider
Frequency converter, servo motor - YASKAWA, Japan
CNC system - Siemens
Stroke switch - Omron
Oil pump - NACHI, Japan
Hydraulic valves - Huade, Beijing
Ball screw - Hiwin, Taiwan
Poswer supply - 380 Volts/3 Phases/50Hz
 
Options
- Side shear

Packing: Coating with anti-rust oil on working surface, with plastic film layer for whole machine. Packed in  container and iron cases 

After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
    management system in our company and on our products.
   All products before ex-works have been strictly tested and are in conformity with technical agreement and
   standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
    could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
    to guide the installation, testing and training the operators from 7 days to 45 days after the machine  
    reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
   (USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
    included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
    firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
    free to contact the Seller.  
    If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
    service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
    which is helpful for customers'  special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
    long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
    failure description, clear pictures and videos, if possible.
    Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
    B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
    service at lowest cost. 


 

Truck Mounted Water Well Drilling Rig

Truck Mounted Well Drilling Rigs,Truck Mounted Water Well Drill,Truck Mounted Water Well Drilling Rigs,Truck Mounted Well Drilling Rig

Taian Longye Import And Export Trade Co.,ltd , https://www.drillingrigfactory.com