Ground Drill Machine,Drilling Machine,Earth Auger Drilling Machine,Long Auger Digger Drill Machine Taian Longye Import And Export Trade Co.,ltd , https://www.longyedrillingrig.com
Basic knowledge of wireless monitoring network system!
1. What is AP?
Answer: AP-Wireless Access Point (WirelessAccessPoint)
AP is the HUB in the traditional wired network, and it is also the most commonly used equipment when building a small wireless LAN. AP is equivalent to a bridge connecting wired and wireless networks. Its main function is to connect various wireless network clients together, and then connect the wireless network to the Ethernet, so as to achieve the purpose of network wireless coverage.
AP is also divided into "thin" and "fat"?
Thin AP (FITAP):
Also known as wireless bridges, wireless gateways, and so-called "thin" APs.
Popular understanding of thin AP: It cannot be configured by itself, and requires a dedicated device (wireless controller) for centralized control and management configuration.
"Controller + thin AP + router architecture" is generally used for wireless network coverage, because when there are a large number of APs, only the controller is used to manage the configuration, which will simplify a lot of work;
Fat AP (FATAP)
The so-called fat AP in the industry is also called a wireless router. Wireless routers are different from pure APs. In addition to wireless access functions, they generally have two interfaces, WAN and LAN, support address translation (NAT), and support DHCP server, DNS and MAC address cloning, as well as VPN access, firewall and other security Features.
2. What is AC?
Answer: The Wireless AccessPoint Controller is a network device used to centrally control the controllable wireless APs in the LAN. It is the core of a wireless network and is responsible for managing all wireless APs in the wireless network. The management of APs includes : Issue configuration, modify related configuration parameters, radio frequency intelligent management, access security control, etc. (All ACs and APs currently circulating in the market are the same
(The talents of manufacturers manage each other)
3. What is POE power supply and what is POE switch?
Answer: POE (PowerOver Ethernet) POE is also known as a local area network-based power supply system (PoL, Powerover LAN) or Active Ethernet (Active Ethernet), sometimes also referred to as Power Over Ethernet, which refers to the existing Ethernet Without any changes to the network Cat.5 cabling infrastructure, while transmitting data signals for some IP-based terminals (such as IP telephones, wireless LAN access points, network cameras, etc.), it can also provide such equipment Provide DC power supply technology. POE technology can ensure the normal operation of the existing network while ensuring the safety of the existing structured cabling, and minimize costs.
Popular application in the market-POE switch: In addition to providing the transmission function of a common switch, a POE switch can also provide power to the other end of the network cable. Power supply + data transmission is integrated, no additional power supply module or POE power supply module is required to power the device, and a Cat.5 line completes all the work.
The difference between "standard" and "non-standard" of POE power supply
• Standard poe: According to the IEEE802.3af/at specification, it is necessary to detect the 25K characteristic resistance of the power receiving terminal and perform a handshake. Only when the handshake is successful, can the power supply be supplied; otherwise, only data (data) is passed.
• Example: Plug the POE power supply into the computer network card, the computer network card will not be burned, only normal Internet access because the data can pass.
• Non-standard POE: also known as forced supply type, power is supplied as soon as the AC power is turned on; without first detecting the power receiving end, without handshake, directly 48V or 54V power supply.
• Example: Plug the POE power supply into the computer network card, you can access the Internet normally, but if you do not negotiate to directly supply 48 or 54V, it may burn the device.
There are roughly 48V, 24V and 12V output voltages (DC) on the market
4. What software and hardware are needed to deploy a wireless project?
Basic hardware: router POE switch AC controller wireless AP
High-end hardware: firewall router traffic and behavior management bypass the main switch floor switch POE switch AC controller wireless AP
5. Is the power of AP the bigger the better?
Answer: No, the greater the power of the AP, the higher the signal strength transmitted. Literally speaking, it will lead you to misunderstandings. Of course, the stronger the signal, the better, but the stronger the signal is for itself, the entire wireless network The transmission signal in the medium is both parties. The transmitting end and the receiving end will transmit data to each other. If the signal at the transmitting end is too strong, it will inevitably affect the return data of the receiving end, which will cause network transmission delay or packet loss.
Popular understanding:
In a space, you and another person are talking at the same time, and the other person's voice is too loud, and your voice is too small, which will cause the other person to not hear what you are talking, thus affecting the quality of the call.
6. In a large-scale wireless project, what are the key points and the most important points to pay attention to?
Key points of engineering perspective:
a. Design
The actual construction drawing, determine the routing position of the wiring, need to consider such as: concealment, damage to the building (characteristics of the building structure), avoiding the power line and other lines while using the existing space, the cable in the field situation, etc. Necessary and effective protection needs.
b. The location of the router
The router is generally selected in an underground light-current room (away from the strong-current room to avoid strong electromagnetic interference). Pay attention to ventilation and keep it dry. It is best to have a cabinet and put it together with the core switch.
c. Location of POE power supply switch
The location of the POE switch should be selected reasonably, located in the middle of the AP point, to reduce wiring costs and shorten the distance between the switch and the AP
d. AP location selection
The point layout of the AP selects the central area of ​​the scene and radiates it toward the periphery. The coverage areas of AP parts should overlap to reduce signal blind areas. The distance between the AP and the POE switch should not exceed 80 meters (a genuine Anpu network cable as an example)
e. Laying of network cable
As the transmission carrier of the network signal, the network cable should be protected during the laying process, and there should be no breaks or dead angles. If necessary, iron pipes should be worn or placed in the roof bridge. Special attention is paid to the principle of high-voltage wires to reduce interference to the signal
Precautions for practical debugging and post-maintenance:
a. External network and routing: The external network cable is in place to ensure the normal Internet access conditions of the line, and the routing is connected to ensure that the routing itself can normally communicate with the Internet. The main exchange and construction floor exchange are connected during construction to ensure the normal communication of the backbone network.
b. Debug walkie-talkie: During the commissioning stage, a set of walkie-talkie equipment needs to be seconded to the mall to facilitate debugging.
c. During the construction and debugging stage, sufficient spare parts must be reserved for AP, switch, network cable, and other construction and debugging hardware.
d. Construction drawings: Before each construction, please ask the construction party to give us two construction drawings.
Construction network topology: requirements, detailed floor switches, routing information and location, number of APs on each floor, and connection methods.
Construction equipment connection line identification diagram: requirements, routing and switch and AP connection information, corresponding ports, etc., the approximate network cable length of all connection lines (including road-switch-AP).
e. Construction wiring and line marking planning:
Information identification record: AP point Mac information record: when the construction party places the AP location, it is necessary to record the floor number and location number of the AP and the corresponding Mac information (note the corresponding floor plan AP number, for example: 1st floor No. 1 mac information format is 1F- 1: AC:11:22:33:44:AP ). This information is uniformly recorded in the Word document floor shopping mall construction drawing according to the floor distribution or directly manually recorded in the free space on the side of the construction drawing, which is convenient for later maintenance and use.
Wire mark identification record:
(1) The input and output lines of the switch: It is necessary to indicate which floor and location number of the AP is connected to the terminal of the identification or serial number (note the corresponding floor plan AP number, such as: 1F-1 in the format of 1F-1), Lines coming in from the external network must also be marked with a cable: "External network access must be marked."
(2) Interconnection between switches on all floors: The source of the wiring connector with the identification or serial number should be marked at the head of the line interconnection line of the switch. (Pay attention to write the floor and switch label, such as: switch 1 on the first floor, the format is 1F-1 SW)
Check on site whether the installed AP is powered on and working normally:
After the construction is completed, the construction personnel shall check all APs on the spot to be energized normally. The green indicator on the AP is always on. If the route is in place and running, the software can be used to detect whether the AP is normally emitting signals and surfing the Internet.
If the above information is completely clear, there is no need for the construction personnel to be on site. If the above information is completely unclear, the construction personnel must cooperate on site for each commissioning.