Car stickers can show personality, you can also beautify the body, for which many owners will choose to paste personalized car stickers for the car, but many owners do not know the car stickers in the paste of attention, the following editor for everyone to briefly explain . Nowadays, many car owners will paste personalized car stickers for cars. However, many car owners will encounter many problems when they paste their own hands. If we don't know these precautions, it will take time and effort. Here's a brief introduction for everyone. Advice on pasting stickers. Precautions: Note 1: The owner must clean the car before sticking the car sticker for the car, and then carefully tear the car's car wrapping paper, remember not to bring a lot of dust or sand and gravel into it, to avoid unnecessary to the owner trouble. Note 2: Summer is the season of thermal insulation paper. The temperature in the sun or in the car is very high. It is inevitable to open air-conditioning stickers in the car. To prevent the dust inside the car from flying around, it must be air-conditioned when the paper is opened. The wind speed was adjusted to the lowest, and the paper was put on the glass and the wind speed was high. Note 3: In order to avoid air bubbles entering the vehicle, the owner must be careful when carrying the sticker on the car. If he sticks to it, he finds that the position is a lot worse. After moving, he will stick to the surrounding objects and the sand in the mud tank. Note 4: If there is not a lot of mistakes after the operation, it is recommended that the owner must not rework easily. The more times the owner opens the car, the more sand particles will enter, and the more harm than good. Note 5: Do not wax the dress for the first week of the car. Wax will make the sticker sticky. Do not wash the car within 3 days of the paste. Do not post it on rainy days. Tips: According to the "Regulations for the Implementation of the Road Traffic Safety Law," motor vehicle painting, marking, or advertising should not affect safe driving and observation of roads. Therefore, when the car owner sticks a car sticker, do not stick it as he likes. ID starch pump is a horizontal, single-stage, cantilever Centrifugal Pump. Its rated performance characteristics and installation dimensions conform to the standard ISO2858, and its manufacturing technical conditions conform to ISO5199. This series of pumps absorbs the advantages of KSB pumps and WARMAN pumps. The improvement of the pump makes the solid content of the conveyed liquid up to about 50%. It is specially designed for the transportation of special media with high solid content, precipitation and easy crystallization, and fiber in the starch, sugar, food, pharmaceutical, chemical and other industries. Put an end to "running", "running", "leakage", "blocking" and other phenomena, China Starch Association "starch equipment localized first-class product". Special Pump For Starch,Food Pump,Screw Pump,Food Transfer Pump Jiangsu Qiantu Trading Co., Ltd. , https://www.jsqiantupump.com
The impeller design of the ID series pump is based on the solid content of the conveying slurry, whether it is crystallized and glued, the size of the solid particle size, and the length of the suspended fibers. The impeller can be designed to be closed and the flow channel is widened on the premise of not affecting the rated performance. , semi-open, open, swirling, etc., the seal can be designed as single-end or double-end mechanical seal, with impeller plus packing seal, plus impeller plus skeleton oil seal, etc.