Off-highway dump truck products originated from foreign countries and have been developed for decades in foreign countries. The basic technology has been relatively mature. The wide-body dump truck for port is the first in China for SINOMACH (Luoyang) Co., Ltd., which evolved from the ordinary unloading variant. The car body is moderately widened. The overall principle and structure are similar to the heavy truck self-unloading. The load capacity is 40 to 80 tons and the width is about 3 meters. Compared with ordinary dump trucks, the advantages are outstanding. 1. The transportation capacity of the vehicle is large, which is basically twice that of ordinary self-unloading. 2. The safety management pressure is significantly reduced. The same workload, the number of vehicles can be reduced by half, the traffic volume is reduced, the vehicle density is greatly reduced, and the safety accident is greatly reduced. 3, with half the effort: the same amount of vehicles reduced by half, the number of drivers can be reduced by half, the driver's capital is halved. 4. Low operating cost In terms of fuel consumption, SINOMACS is 75 liters per 100 kilometers. According to the same volume, it can save more than 30% of cost and save fuel. 5, long-life design, enhanced axles, engineering-type steel tires, strengthen the large compartment structure, high bearing capacity. 6, clean energy products, can be equipped with LNG gas power system. (This article comes from Guoyang Luoyang) Biomass Wood Fired Thermal Oil Boiler YLW series of coal/biomass fired thermal oil boilers use coal or biomass as the fuel and thermal oil as the medium, and force the medium to conduct liquid phase circulation by the circulating oil pump. The boiler consists of the body above and the grate below. Biomass Wood Thermal Oil Boiler,Industrial Wood Fired Thermal Oil Boiler,Industrial Biomass Fired Thermal Oil Boiler,Biomass Fuel Thermal Oil Boiler,Wood Fuel Thermal Oil Boiler Henan Yuanda Boiler Co., Ltd. , https://www.industrysboiler.com
The radiation heat transfer section of the boiler body adopts the double square shaped compact coil structure, the convection heat transfer section adopts the S shape multiple passes heat transfer. A high efficiency air preheater is equipped at the tail of the boiler, it can absorb heat and reduce exhaust gas temperature. After the fuel is fully burned in the combustion chamber, most of the heat is absorbed by the radiation heating-surface, the high temperature flue gas enters the convection heating surface and transfer the heat. After it comes out of the boiler, the air that is needed by boiler combustion is heated in the air preheater.
Then it passes the dust collector and is drawn by the I.D. fan to be discharged into the atmosphere through the chimney.