CATSU excavator sweeper is an attachment that can be added to an excavator to sweep and clean surfaces. Sweeper For Excavators,Excavator Broom Sweeper,Rotator Sweeper Tiltrotator,Excavator Road Sweeper CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.tiltrotatorcat.com
CATSU excavator sweeper is typically used for cleaning construction sites, roadways, and other outdoor areas.
CATSU excavator sweeper consists of a rotating brush that is powered by the excavator's hydraulic system.
The brush sweeps up dirt, debris, and other materials and deposits them into a collection bin, which can be emptied as needed.
CATSU excavator sweepers are commonly used in construction, landscaping, and other outdoor industries where cleaning and debris removal is necessary.
The flammable gas alarm is used by the enterprise or resident boss to install in the presence of flammable gas to detect the presence of flammable gas leakage. The fixed flammable gas alarm is mainly composed of a gas controller and a gas detector, but this is not The gas controller and the gas detector are installed in the same place. If it is installed, the flammable gas alarm will be damaged and the malfunction will not work. The controller of the flammable gas alarm is installed in the general control room of the duty room or Where the duty officer pays attention, the gas detector is installed in the place where the flammable gas leaks. How many flammable gas detectors are installed is based on how many flammable gas leaks exist in the monitored place, according to the installation distance requirement, the user is If there is a flammable gas leak after installing the flammable gas alarm, it should be detected by the flammable gas alarm.
1. When an alarm occurs in the flammable gas alarm, the first discoverer should immediately go to the position of the flammable gas alarm probe to see the cause of the alarm, and prohibit the direct shutdown of the alarm;
2. Immediately notify the department head and safety officer;
3. If there is leakage of flammable liquid or the concentration of flammable liquid vapor exceeds the standard (≥25), immediately control the source of leakage, strengthen the ventilation of the leaking area, and notify the site personnel to evacuate;
4. Clean the leak source of the combustible gas alarm probe area;
5. The flammable gas alarm can be reset after the leak site is properly handled.
Proper operation of the flammable gas alarm, and rational response after the gas alarm sound and light alarm, in order to achieve the correct role of the gas alarm.