How to maintain the daily life of compressed garbage truck First of all, it is necessary to regularly check the connection of the garbage truck wiring harness. The main method is also visual inspection to see if there are wireless skin cracks, looseness, poor contact, etc. in the garbage truck harness. If not, it is normal to say that it is normal. If so, it must go to the after-sales service point of the garbage truck for further detailed inspection. Secondly, it is necessary to regularly check the tire pressure of the garbage truck, the wear condition of the tread, and whether the nut is loosened. This inspection cycle is preferably performed once a week. The method is first used for visual inspection, and then further tests are performed to allow the garbage truck to run to see if there is a sense of deviation or play. If so, it must not be forced. Use, otherwise there will be a big safety accident during the garbage truck driving, this time must go to the after-sales service point of the garbage truck to carry out four-wheel alignment or dynamic balance inspection, and can not formally go on the road until qualified. Another is to check once a week whether the garbage truck oil, brake oil will be lacking, there are hydraulic devices to consider changing hydraulic oil. Then, it is to check whether the chassis of the garbage truck has oil leakage or water leakage. The chassis of the garbage truck is generally produced by large factories such as Dongfeng. These garbage truck chassis can be jointly maintained at Dongfeng and other national post-sales points. Therefore, it is not only necessary to visually check whether there is an abnormality in this area, but it is better to go to Dongfeng like this. The manufacturer's after-sales point carries out regular maintenance of the chassis part. Finally, check whether the fan belt of the garbage truck is broken or broken, adjust the tightness of the belt, and replace it in time. The point of special attention is the usual inspection of the brake system of the garbage truck. The brake of the garbage truck is the process of generating the braking effect through friction. However, after a long period of use, the garbage truck's brakes will enter due to dirt and other dirt and water, which will cause the friction coefficient to drastically decline. As a result, the braking effect of the garbage truck will be greatly reduced. On the road surface, and there may be a large safety accident, causing the car to crash. The above points are necessary inspection items in peacetime. Only in this way can the safety and normal use of garbage trucks be ensured, and the service life of garbage trucks will be extended to a certain extent, and the maintenance cost of garbage trucks will be reduced. Winery Tote Bags,Wine Tote Bag Pattern,Leather Wine Tote Pattern,Crochet Wine Bottle Tote Sichuan Dole Bonz Trading Co., Ltd. , https://www.dlbzbag.com