Thrust Ball Bearing,51205 Thrust Ball Bearing,51206 Thrust Ball Bearing LBR Bearing Co., Ltd. , http://www.jn-rollerBearings.com
The modularization of products is the concentrated expression and inevitable result of the maturity and standardization of industrial manufactured products. The development of LED street lamps is no exception. The modularity of LED street lamps is so difficult to produce because of the technical obstacles in many key aspects such as heat dissipation, waterproofing, light distribution, free replacement of components, and adaptation to any sodium lamp housing, thus hindering the modularization of LED street lamps. form. As long as the above-mentioned worldwide technical problems are solved, the modularization problem of LED street lamps will naturally be solved.
Beijing Green Times Optoelectronics Technology Co., Ltd. (hereinafter referred to as Green Times Company) did not make a quick effort to enter the LED lighting market in the two years after its establishment. Instead, it has invested heavily in research funding and scientific research, and ultimately at all. The technical breakthroughs have made a historic breakthrough, completely solving the technical problems that restrict the popularization and application of LED lighting. In the domestic LED street lamp market, the initial smashing and turmoil gradually came to a quiet, bringing the domestic and international LED street lamp market to the market. A new dawn.
First of all, in terms of heat dissipation performance, Green Times has developed a nano-heat-dissipating coating with completely independent intellectual property rights. The coating is sprayed on the surface of the heat sink, so that the heat dissipation performance of the heat sink can be further increased by 30%. In addition, in the heat dissipation of the lamp, it also adopts its own patented technology that is transparent to the top and bottom and uses natural air to convect heat. After the two patented heat dissipation technologies are applied to LED street lamps, the operating temperature of the LED street lamps in the actual outdoor environment is constant below 45 °C, thus completely solving the world problem that the temperature is too high affecting the LED road light decay and life, so that With the power of LED street lights, Green Times can guarantee that it will not use light attenuation for 10,000 hours.
Secondly, in terms of waterproof performance, Green Times Company adopted the COB packaging method of the light source, and also created a unique patented packaging method in which the positive and negative lights of the light source are designed directly above the substrate, completely solving the waterproof problem of the light source. Since the independent light source can be fixed on the heat sink by various fixing methods such as screw fixing and circlip fixing, and the patented technology can also adjust the illumination angle of each independent light source according to actual needs, the power of the light source can be adjusted. Adjust as needed, so that the light source of the LED street lamp is completely modularized and easy to maintain and replace.
Third, in other structures, Green Age Company designed the power supply, driver and radiator of LED street lamps into modular structure that can be independently installed and disassembled, and can also easily transform existing sodium lamp housings. After the adaptation, the sodium lamp lamp shell is kept intact and beautiful, and a large amount of replacement cost is saved, which has great practical significance for urban street lamp reconstruction.
Beijing Green Times Optoelectronics Technology Co., Ltd. has completely realized the standardization and modularization of LED street lamps through the comprehensive application of 18 patented technologies. Its advanced technology is far ahead in the world, and it has greatly promoted the popularization value. Produce huge economic and social benefits.