Gongyi Forui Machinery Factory , https://www.foruimining.com
 A. Size: per drawing
B. Material: Brass etc
C. Finish: All kind
D. MOQ: 10000PCS
E. Sample lead time: 15days
Similar Products:(Per drawing)
 Machining basic parameters
1
Material
copper, aluminum, iron, stainless steel, 45 #, POM and other environmental friendly materials
2
Specifications
M1.0-M15, the maximum diameter of machining is 30MM, and the largest diameter of casting is 790MM.
3
Surface Treatment
white zinc, yellow zinc nickel, copper, chromium, tin, gold, silver, etc.
4
Tolerance
Outer diameter tolerance +/- 0.01mm;Â Â Â Length tolerance +/- 0.01mm
Threads can be checked by go-and-not-go-gauge.
5
Processing Methods
manufacture of blue drawing, sample and raw material
  Production equipment
Â
 Detection Device
Certificate
FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.
2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.
---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report, Â Â certificate of material and etc as per your need.
3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.
4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.
5.What is the standard of package?
---Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.
6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.
Product Name: hardware Round Head Knurled Embedded Brass Nut(nut-01)
 A. Size: per drawing
B. Material: Brass etc
C. Finish: All kind
D. MOQ: 10000PCS
E. Sample lead time: 15days
Similar Products:(Per drawing)
 Machining basic parameters
1
Material
copper, aluminum, iron, stainless steel, 45 #, POM and other environmental friendly materials
2
Specifications
M1.0-M15, the maximum diameter of machining is 30MM, and the largest diameter of casting is 790MM.
3
Surface Treatment
white zinc, yellow zinc nickel, copper, chromium, tin, gold, silver, etc.
4
Tolerance
Outer diameter tolerance +/- 0.01mm;Â Â Â Length tolerance +/- 0.01mm
Threads can be checked by go-and-not-go-gauge.
5
Processing Methods
manufacture of blue drawing, sample and raw material
  Production equipment
Â
 Detection Device
Certificate
FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.
2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.
---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report, Â Â certificate of material and etc as per your need.
3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.
4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.
5.What is the standard of package?
---Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.
6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.
Trademark: OEM
Specification: M1.0-M16(Nut-01)
Origin: Guangdong, China (Mainland)
Trademark: OEM
Specification: M1.0-M16(Nut-01)
Origin: Guangdong, China (Mainland)
Product Name: hardware Round Head Knurled Embedded Brass Nut(nut-01)