According to Battery.com.cn, in fact, by reading the phone manual and finding relevant information, the mobile phone does not need to be charged like the previous mobile phone. It does not need to be charged every 12 hours, and it is charged 3 times for the first time. This is mainly because at present, our mobile phones use lithium batteries for both smart phones and ordinary mobile phones, and are misled by the nickel batteries used. In the general specification of using nickel batteries, the general instructions will require the new products to be used for the first time three times. To use up all the power of the phone, charge 12 hours of balls.

Now the mobile phone uses a lithium battery, and the phone is generally fully charged, it automatically switches to saturation and no longer charges. There is no so-called "turbulent" charging that the nickel battery charger has for 10 hours. In other words, if your lithium battery is full, it will be white charger on the charger. And none of us can guarantee that the characteristics of the battery's charge and discharge protection circuit will never change and the quality will be foolproof, so your battery will be on the edge of danger for a long time. This is another reason we oppose long charging, although the probability of causing the failure is small, but at least there is the possibility of damage.

Tips for charging tips for mobile phones:

1. Charge according to the standard time and procedure, even if it is the first three times; when there is a low battery power prompt, you should start charging as soon as possible;

2, try to avoid charging before going to bed, because the charging time before going to bed is longer, and the voltage at night is unstable, the night voltage in many places is relatively high and fluctuating, the impact on the battery is greater.

3. The activation of the lithium battery does not require a special method. The lithium battery will naturally activate during normal use of the mobile phone.

Special Welding Machine For Plastic

Wuxi Yuda offers the widest selection of fusion machine equipment, such as field pe pipe butt fusion welders, Butt Fusion Machines, Pipe Fusion Machines, Workshop Fitting Machines for Fabrication of Plastics, Plastic Pipe Band Saws, PE Saddle Fusion Welding Equipment, Polyethylene PE Pipe Radius Saw. Wuxi Yuda Plastic Pipe Welding Machinery not only produce standard welding equipment for Polyethylene/PE/PP/PVDF plastic pipes and fittings from 40-3000mm, also manufactures special welding machine for plastic for PP, PVDF pipes for non-standard diameter. Fusion welders usually adjust to accommodate a range of different pipe diameters. The ranges of pipe sizes an individual fusion welder can handle are limited so it is important to select a fusing machine that fits the pipe to be fused and judge which technique for fusion welding thermoplastic pipe and fittings together to select among socket fusion welding, butt fusion welding and electrofusion welding. Feel free to tell us your requirement for pipe fusion and pipe fabrication, Wuxi Yuda can design for you and make custom-made plastic pipe welding and cutting equipments and tools,too

Special Welding Machine For Plastic,Pipe Welding Services,Plastic Welding Machine,Plastic Welding Equipment

WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionweldings.com