Physical examination vehicles are those vehicles used by medical institutions for treatment, which can satisfy basic medical examination items and can be used for medical rescue, treatment, and other aspects. In general, basic medical equipment such as biochemical experiments, see-through rooms, etc. will be provided on the car. Because of its characteristics, the car is also called a mobile medical vehicle. The car can meet basic medical examinations.

可移动的医疗体检车_副本1.jpg


These vehicles are different from ambulances and blood donation vehicles. The ambulances are small in size and flexible in the way of first aid. Physical examination vehicles are similar in appearance and size to blood donation vehicles. However, blood donation vehicles are equipped with only simple methods for checking blood types and blood draws. And storage devices. The car used for physical examination is not very different from the bus in size, but its built-in equipment is complete, and general routine inspections can be implemented in the car.

The car moved in some simple equipment for inspection. It was equivalent to putting the hospital's equipment on wheels, allowing the equipment to be dragged to the place where it was needed, and to provide door-to-door medical examination services. Vehicles are divided into different categories depending on the equipment they are loaded with: Some can check all aspects of the body; some can only perform imaging tests; others are specific inspection items that specifically target different groups of people, such as women and the elderly.

可移动的医疗体检车1_副本.jpg

The physical examination vehicle is a type of medical vehicle, which can fulfill the needs of different situations such as on-site medical examination services, medical service to the countryside and emergency on-site rescue of sudden disasters. The equipment can carry out simple on-site medical examinations and emergency assistance. Because of the fluidity of the car, it is possible to deliver medical examination items to meet the needs of different citizens, especially those areas with poor medical conditions and far away from the city.

The above is a brief introduction of the medical examination car. I believe that you already know about the car through reading. The car serves the broad masses of people and provides convenient medical assistance. Because of its mobility, it can easily bring the equipment to where it is needed. It has been recognized by more people and it is believed that its future development will become more and more Well, we can provide citizens with better medical services.


Continuous Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.

Continuous Waste Tyre Pyrolysis Plant

Flowchat of Continuous Waste Tyre Pyrolysis Plant

Continuous Waste Tyre Pyrolysis Plant

Advantages of Continuous Waste Tyre Pyrolysis Plant

 1.  Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;

                  2.  Auto-loading, auto-discharging and oil coming out at the same time;

                  3.  Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;

                  4.  Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;

                 5.  High efficiency condensers, more oil output, good quality oil, easy to clean.

                 6.  Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.

                7.  National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.

               8.  Easy to operate, need less manpower.

 

Technical Parameter of Continuous Waste Tyre Pyrolysis Plant

          

NO.

ITEM

Technical Parameter

1

Suitable Raw Materials

Small pieces of Waste tyre,rubber, waste plastic≤5cm

2

Operating Mode

Fully Continuous Operation

3

Structure

Horizontal Type Revolve

4

Loading and discharging

Fully Automatic Feeding and Discharging under High Temperature at Same Time

5

Capacity(24h)

8-20Mt

6

Work Pressure

Slightly Negative Pressure

7

Oil Yield of tyres

40%-45%

8

Reactor Rotational Speed

1R/M

9

Installation Power

110kw

10

Cooling Method

Cycle water

11

Type of Drive

Sprocket Wheel

12

Heating Method

  Hot Air

13

Noise dB(A)

≤85

14

Main Reactor Weight (MT)

About 20Mt

15

Total Weight(MT)

About 45Mt

16

Installation Space Required

60m*20m

17

Manpower

2/shift

18

Shipment

5*40HC

19

Delivery time

≤70Days

 

 

 

 

 

 

Continuous Waste Tyre Pyrolysis Plant

Continuous Pyrolysis ,Continuous Pyrolysis Plant,Continuous Waste Tyre Recycling,Waste Tyre To Oil

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl