In leak-free pumps, shield pumps are more widely used. Shielding pump with a stator winding and rotor windings were placed in a sealed metal cylinder motor drive shield, pump housing and drive motor housing flange seal connected to the pump to remove the pump shaft seal structure. Suitable for transporting valuable liquids or radioactive liquids.

Structure type:

1, the motor and pump integrated structure, pumps and motors for the coaxial connection;

2, the inner side of the motor stator and the rotor has a shield sleeve, the inner side of the shield sleeve and pump connectivity;

3, the installation of sub-horizontal and vertical two

4, the motor to cancel the cooling fan, through the stator and the rotor between the circulating medium to cool the motor, while using the motor base surface cooling.

Features:

1, motor and pump integrated structure, all static seal, the pump is completely leak-free;

2, fully enclosed, non-leakage structure can transport toxic and hazardous liquid substances;

3, the use of shielded water-cooled motor and cooling fan to cancel the quiet low-noise operation of the pump, suitable for high ambient noise requirements of the occasion;

4, the use of transport medium lubrication of graphite sliding bearings, lower operating noise and without manual refueling, reducing maintenance costs; In recent years, the bearing materials and an increase of silicon carbide SIC, superhard, better life than graphite bearings.

5, the vertical structure can be installed on the pipe like a valve, easy and quick installation, and only need to remove the motor and impeller can be repaired, without removing the pipe.

6, can be installed with shock absorbers or shock absorbers to run, so that pump noise in operation is lower.

Electric pump shielding Specific forms:

1, conveying the basic type of ordinary materials;

2, Conveying the reverse circulation of vaporized materials and reverse pressure type;

3, conveying high-temperature materials, high temperature separation type, usually below 350 degrees temperature;

4, the delivery of the material particles of mud type;

5, conveying high melting point material of high melting point type;

6, conveying material level lower than the pump inlet self-priming, self-priming height should be less than 5 meters.

Shielded pump applications

First, civil:

1, ground source heat pump air conditioning circulating water system;

2, Lithium bromide air conditioning unit air-conditioning pumps, transformers pumps, locomotive pumps;

3, heating heating circulating water system;

4, fire water booster system;

5, tap water pressurization system.

Second, industrial and military space:

1, chemical and pharmaceutical industries with toxic and hazardous liquid transport;

2, space rocket launch fuel before filling;

3, nuclear-powered nuclear shield pump.

【Print】 【Close】

Sectional Warping Machine

Performance:

1. High precision mechanical guiding bar speed regulation. ( Maximum 45 grades of speed)

2. Compressed air and steel belt brake.

3. Steel fixed cone angle drum (6.5" – 9")

4. Electric upper and lower shafts

5. Diameter rotating speed: 0-600(m/min)

6. Back shaft rotating speed: step less speed regulation

7. Automatic length record (according to drum running number) and the length can be preset.

8. Automatic stop and brake. Bidirectional bobbin rack and electrically controlled lease box can be equipped.

9. Width: 2000mm – 3600mm

10. Applicable beam diameter: OD 600MM – OD 1000MM

Sectional Warping Machine,Sectional Power Loom,Warping Weaving Machine

SHAOXING TEXTILE MACHINERY GROUP COMPANY , https://www.textileweavingmachine.com