One of the most common problems encountered in winter is the fog on the windows, which affects the sight of the commercial vehicle driver. The most common method of defogging the driver is to talk about the cooling in the car and the fans are all on. Although this can quickly stop the condensation of water vapor on the window glass, the windshield will wind up a few seconds later. The fog above will disappear. However, the use of cold air to remove the fog is also a bad thing, because it is also silent when the cold weather is turned on. The outside temperature was relatively cold, and the car was colder. Although the effect of turning on cooling to remove the mist is relatively fast, the temperature difference between the outdoors and the interior of the vehicle will cause the fog to appear repeatedly. This is to allow the driver to freeze the huskies while driving. The fog is still not to be used. Before you need to drive a commercial vehicle, you can give the hot air to everyone first. After drying some moisture on the windows and inside the car, you can maintain the dryness of the car. This will ensure that the fog will not appear on the window glass for a long period of time, and that the driving temperature in the vehicle can be well protected at the proper temperature. Do not use the outer air circulation during driving. The temperature can be adjusted to about 25 degrees Celsius. Don't be greedy. Static electricity is the most annoying thing in winter, because the temperature in winter is relatively dry, so it is also the season of high static electricity. In particular, the wearing of sweaters and chemical fiber clothing, as well as the hair of a female friend is more likely to appear static. Usually it is not so good to be charged by static electricity, but commercial vehicles are refueling at the gas station and static electricity has to be noticed. When we need to refuel, we usually have gas station staff who come over to help. If we encounter self-refueling, we must pay attention to whether there is any static discharge device on the tanker. If there is any, we can use it. Put it on top to remove static electricity. If it is not, you can touch the body shell or some conductive metal before you add oil.
3) Multi spindles can work at the same time,also can work alone, many times increasing inefficiency. can also
control the machine heads independently, can use only one head to process and make increasing the working
area.
cylinder products,it also can easily engrave 360 degree human body, Buddhist statue, sculpture and other art
works
5) Easy-to-operate Taiwan SYNTEC control system
6) Powerful PowerMill software with post processor
7) Except X, Y, Z and Rotary Axis, the 5th axis is the spindle can swing front and back, which can do Multi-Heads CNC Router,Multi-Heads Wood CNC Router,Multi-Spindles CNC Router,Multi-Heads Woodworking CNC Router Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com
Pneumatic System CNC Multi Head Router / Atc CNC Router with 4 Axis Rotary 1530
Multi Heads 5 Axis Rotary Simultaneous CNC Wood Carving Router Machine
Jinan Factory Supply High Quality Woodworking Multi Head CNC Router for Wood Furniture
Multi Workstage, Pneumatic Three Heads, 1325 Wood Working CNC Router
Advertising industry: advertising signs, logo making, acrylic cutting, plastic molding, a variety of
materials advertising the production of decorative products.
Mold Industry: engraving copper, aluminum, iron and other metal molds, as well as artificial marble,
sand, plastic sheeting, PVC pipe, wood and other non-metallic mold.
Other Industry: a variety of large-scale relief sculpture, shadow carving, widely used in the craft industry.
Woodworking: three-dimensional wave board processing, cabinet doors, solid wood doors, wooden craft, paint doors, screens, craft fan window processing, shoe polisher, game cabinetsand panels, mahjong table, computer desk and furniture products, auxiliary processing
2) Each spindle has two heads with two tools, which is equivalent to Auto Tool Changer
4) This machine is very suitable for furniture bulk production such as desk legs/stair handrails and other column /
more complex work.
1) This 5 axis cnc router machine with 8 rotary axis is with removable table, so, when you cut and engrave the flat /
plane, just need to put on this table; when you do the column / round / cylinder, just need to take down the
moveable table.