Pp Corrugated Packing Boxes,Folding Corrugated Plastic Box,Folding Pp Corrugated Skeleton Box,Pp Corrugated Plastic Storage Box Yixing Guanyu New Materials Co.,Ltd , https://www.plasticsheetsupply.com
1.1--2.4GHz ISM band of a variety of image transmission technology 2.4GHz image transmission equipment using spread spectrum technology, there are two kinds of frequency hopping and direct-scaling work. The frequency hopping mode is low, the throughput rate is about 2 Mbit/s, and the anti-jamming capability is strong. Different frequency hopping sequences can also be used to realize the same-site multiplexing to increase the capacity. The direct-spread mode has a high throughput rate, but its anti-interference performance is poor, and multiple sets of systems are restricted from the same site.
2.4GHz image transmission can be based on the IEEE802.11b protocol, the transmission rate is 11Mbit/s, and the overhead in the transmission process is removed. The actual effective rate is about 5.5-6Mbit/s. Later developed IEEE802.11g standard, the rate limit reached 54Mbit/s, up to 108Mbps in special mode, the standard has high interoperability, point-to-point transmission of several MPEG-4 compressed images.
Also used in the 2.4GHz band are Bluetooth technology, HomeRF technology, MESH, and microcellular technology. With the gradual expansion of the application range, the 2.4 GHz frequency band is operating at full load. The rate issues, safety issues, and interference issues deserve further study.
1.2-3.5GHz Wireless Access System The 3.5GHz wireless access system is a point-to-multipoint microwave communication technology using FDD duplex mode, using 16QAM and 64QAM modulation methods and based on the DOCSOS protocol. Its operating frequency band is relatively low, the radio wave free space loss is small, the propagation rain attenuation performance is good, the access rate is high enough, and the equipment cost is relatively low. The system has a relatively good coverage capacity, usually 5km~10km, suitable for low-cost and large-area coverage applications at the prefecture and city level units; it can also be complemented with WLAN and LMDS to form a coverage area size and users. Density-compacted multi-layered organic complementary mode of operation. The problem is that there is insufficient bandwidth, and only 30 MHz upstream and downstream can be difficult to use on a large scale.
1.3--5.8GHz WLAN Products The 5.8GHz WLAN products use OFDM OFDM. In this band, the WLAN products are based on the IEEE 802.11a protocol, and the transmission rate can reach 54 Mbit/s and 108 Mbps in special mode. According to the WLAN transmission protocol, when the peer-to-peer application is used, the effective rate is 20 Mbit/s; in the case of point-to-six, the effective transmission rate of each image is about 500 kbit/s, which means that the total transmission data volume is 3 Mbit. /s or so. For the transmission of wireless images, the problem of "high-definition digital image transmission in wireless networks" is basically solved, making it possible to transmit digital images over a wide range of frequencies in the 5.8 GHz band, which is particularly applicable to urban security monitoring systems.
ZWD-2422 wireless high-definition transmitter wireless transmission equipment wireless transmission equipment operating frequency 4.9GHz-5.9GHz, when it receives other RF equipment or signal interference can automatically adjust to the appropriate frequency, it is generally not in the 2.4G about 5G frequency band , 3G will not interfere with the ZWD-2422's wireless HD transmission.
WLAN transmission monitoring images, more mature is the use of MPEG-4 image compression technology. This compression technology at 500kbit/s rate, compressed image clarity can reach 1CIF (352 × 288 pixels) ~ 2CIF. At a rate of 2 Mbit/s, this technology can transmit 4CIF (702 × 576 pixels, DVD clarity) sharpness images. The digitized image after compression by MPEG-4 is transmitted through a wireless channel, and with the corresponding software, it is easy to realize a networked and intelligent digital urban security monitoring system.
2.4/5.8GHz 802.11n-based products, 11n products are divided into AN and GN work at 5.8GHz and 2.4GHz, respectively, transmission rates up to 150,300,600Mbps, effective transmission rates are 60,160,300 Mbps. With high-definition With the development of cameras, this high-bandwidth 11N mode is ideal for HD camera transmission. The cooperation of high-definition cameras and high-bandwidth wireless transmission devices will gradually become the trend of wireless video surveillance.
The Broadband Fixed Wireless Access System (LMDS) system in the 1.4- to 26-GHz band is a typical 26-GHz wireless access system that uses 64QAM, 16QAM, and QPSK. LMDS has greater bandwidth and bidirectional data transmission capabilities, can provide a variety of broadband interactive data and multimedia services, to solve the bottleneck of the traditional local loop, to meet the needs of high-speed broadband data, image communications and broadband internet services. The LMDS system covers a range of 3 km to 5 km and is suitable for metropolitan area networks. Because countries in the world have different plans for the working frequency band of LMDS, their compatibility is poor, their rain attenuation performance is poor, and their cost is high.
2. In addition to the need for fixed-point image monitoring, the demand for moving image transmission is also very strong. Mobile video image transmission is widely used in *command vehicles, traffic accident exploration vehicles, fire control *field command vehicles and customs, oil fields, mining, water conservancy, electric power, finance, maritime affairs, and other emergency and emergency command systems. The main role is to The real-time image of the scene is transmitted back to the command center so that the commanding and decision-making personnel of the command center are immersed in the environment, the accuracy and timeliness of the decision-making is improved, and the work efficiency is improved. Fujitsu has introduced the use of public network and special technology for mobile video transmission.
2.1 The use of CDMA, GPRS, 3G public mobile network to transmit images The mobile transmission technology of CDMA wireless networks has many advantages: good confidentiality, strong anti-jamming capability, resistance to multi-path fading, flexible configuration of system capacity, and low network construction cost. CDMA adopts MPEG-4 compression method, compresses the picture with MPEG-4 CIF format, can reach the speed of about 2 frames per second; If adjust the picture to QCIF form, can reach more than 10 frames per second. However, for the security system, the low transmission frame rate is generally used to ensure the clarity of the transmission, because only the image clarity above the CIF can meet the needs of investigation and forensics. If you want to further improve the real-time transmission rate of live images, a simple solution is to use multiple CDMA network cards bundled to increase the transmission rate of wireless channels. There are 2~3 NIC bundled routers on the market. The cost of adding NICs is to increase equipment costs and usage costs. With the continuous development of video compression technology, the transmission rate of 3 to 4 frames per second on a single network card is achievable, and if it can transmit 3 to 4 frames of CIF format images per second, it can meet the safety of general mobile public transport facilities. Monitoring requirements.
GPRS is a wireless packet switching technology based on the GSM system that supports specific point-to-point and point-to-multipoint services and transmits data in the form of “packetâ€. The GPRS peak rate exceeds 100 kbit/s, and the network capacity is only allocated when needed. This transmission method is called statistical multiplexing. The main advantage of GPRS is that it is always online and traffic-based. It can connect to the Internet at any time without dialing, keeping in touch with the network at any time, and has high resource utilization.
3G technology has replaced GPRS and CDMA gradually, and the effective rate that can be achieved is 384 kbit/s. In a network-deployed urban area, one CIF image can be transmitted in real time and can reach 20 frames per second. However, it should be noted that even if the speed is increased a lot, do not think that all mobile transportation facilities can transmit images back to the monitoring center at the same time because the concept is almost impossible for public network image transmission.
2.2 Dedicated image transmission technology for emergency emergencies For some emergency command center image transmission systems, it is often required to transmit the image of the emergency scene back to the command center. For example, there are major natural disasters, floods, fire scenes, large-scale mass gatherings, and important safety and security tasks. This kind of emergency image transmission system should not use public network transmission. It is better to use professional mobile image transmission equipment. However, at present, China has not yet specifically planned frequencies for this. There are several technologies that can be used for mobile video transmission.
2.2.1 WiMAX
WiMAX is a point-to-multipoint broadband wireless access technology. WiMAX adopts a series of new technologies such as dynamic adaptive modulation, flexible system resource parameters and multi-carrier modulation, and has a high-speed transmission capability (up to 70 Mbit/s). ~100Mbit/s) and better QoS and security control. The WiMAX 802.16e coverage can reach 1 to 3 miles and is mainly located in the mobile wireless metropolitan area network environment. However, it is difficult for 802.16e to obtain enough global unified frequencies, and the construction costs and equipment prices are relatively high.
2.2.2 Wireless Mesh (MESH) Technology Wireless "MESH" technology enables high-speed data communication in a closer range. With the 2.4 GHz frequency band, the effective bandwidth can reach 6 Mbit/s. This kind of technical link is simple in design, flexible in networking, and easy to maintain. Mesh Controller centralized management support, terminal data without configuration, automatically generate solutions. Support Mesh Controller hot backup links, automatic roaming switching and other functions. Support centralized management of Mesh Controller user terminals and multiple authentication methods to make the system more secure. Support Mesh Controller user flow control function, according to the type of user free allocation of traffic, support for speed limits, limit traffic, limit the Internet time and other functions.
For fixed wireless image transmission, lower cost WLAN technology products can be used; for mobile video image transmission, public mobile network or dedicated wireless image transmission technology can be adopted. It is hoped that more peers can further pay attention to wireless image transmission issues to promote the development of the industry.
1. Fixed-point image monitoring and transmission system The wireless image monitoring and transmission system at a fixed point is mainly used in places where wired closed-circuit monitoring is inconvenient, such as monitoring systems for harbor terminals, video and data monitoring for river water conservancy, forest fire monitoring systems, and cities. Safety monitoring, construction sites, etc. The following describes the different image transmission technologies from low to high frequency bands.