Model NO.: SHJ-75 series
Screw Length: 290mm X Segment
L/D: 12:1 - 48:1
Identification: CE ISO9001
Type: Parallel Twin Screw
Trademark: HS
Transport Package: Packed in Wooden with Soft Plastic
Specification: CE. ISO 9001
Origin: Jiangsu. Nanjing
HS Code: 84772090
Model NO.: SHJ-75 series
Screw Length: 290mm X Segment
L/D: 12:1 - 48:1
Identification: CE ISO9001
Type: Parallel Twin Screw
Trademark: HS
Transport Package: Packed in Wooden with Soft Plastic
Specification: CE. ISO 9001
Origin: Jiangsu. Nanjing
HS Code: 84772090
Twin screw extruder barrel and screw element


SPECIFICATONS
1. Extruder replace parts
2. High quality, high accuracy
3. Screw: W6Mo5Cr4V2.38CrMoAl. SKD11. SACM645 etc

Description:
The flexible modular principle is realized with screw barrel sections from the wide
Range ofdifferent designs possible. Fast, intensive and uniform heating ofthe screw
Barrel section is ensured by electrical heaters. The barrel sections are cooled with
Water, by means ofan internal bore system, with bores arranged close to the inside
Barrel wall.

Barrel sections are available as:
Closed barrel section
Barrel section with opening for material feed or for devolatilization
The processing section is provided with stainless steel plates as a protection against
Accidental contact.
Screw Elements: High-speed steel W6Mo5Cr4V2, nitrogen treatment.
Screw Shaft: High performance alloy steels, 40CrNiMoA; With standing high load, Etc
Description
The inter meshing screws co-rotate and wipe each other with narrow clearance so that
No residues are left in the screw flight and clean effort is thus reduce.
Screw elements with various pitches and lengths
Kneading blocks with various angles ofstagger, numbers ofkneading disks and disk
Widths.
Screw tips to fix the screw set axially
Gear teeth connection to ensure power flow between the screw shaft and screw
Elements.

Features:
1. Screw components designed by computer aids is kneading type, has excellent self-cleaning function, the new kneading block design effectively avoid the problems of overheating and energy consumption.
2. According to process system and formula requirements, the unit can optimize its L/D ratio, barrel structure, screw array, venting number and location, feeding method, electrical control methods etc. For rational allocation.

Packaging for exports:
Package: Wooden case or Using Anti-rust oil processing, then use stretch film cover extruder against moisture damage.
Shipping: By sea or By express

Our machine types:
1. Co-Rotating Parallel Twin Screw Pelletizing Extruders
2. Single Screw Pelletizing Extruders
3. Die Face Cut (Air Cooling) Pelletizing Extruders
4. Double Stage / Double Degassing Recycling Extruders
5. Crushers, Mixers, Storage Tanks, Vibrators, Granulators, Blowers
6. Extruder spare parts
We are manufacturer of twin screw extruder, also can supply all the spare parts.
Like screw, barrel, feeder, die head electric controller and gearbox.
Base Material 1) 38CrMoAlA(JIS SACM645) 2)Cr12MOV(JIS SKD-11)
3) 4Cr5MoSiV1(JIS SKD-61) 4) 42CrMo(AISI 4140)
Bimetallic Alloy Material 1)Fe-based alloy 2)Ni-based alloy/Deloro alloy
3)Co-based alloy 4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide
Surface Treatment
1.Heat treatment 2.High frequency treatment
3.Nitriding treatment Nitrided case depth: 0.50-0.80mm
Nitrided hardness: HV850-1020 (HRC57-65)
4.Hard chrome plating treatment Chromium-plating layer depth: 0.05-0.10mm
Chromium-plating layer hardness: more than 950HV
5Nickel alloy plating treatment Bimetallic barrel: centrifugal casting (Inlay alloy)
Bimetallic screw: plasma alloy coating spraying
Bimetallic layer depth: 0.8-2.0mm
Bimetallic layer hardness: HRC 57-72
Basic Information
Nitride Brittleness ≤Grade Two
Surface Roughness Ra0.4um
Screw Straightness 0.015mm
Hardness after hardening and tempering 0.025~0.10mm
Material Application 1)General plastics
2)ABS,PA,PC,PE,PET,PS,PU,PVC,U-PVC
3) PA+GF (Glass Fiber)
4)Flame-resistant reinforced plastics
5)Modified engineering plastics
6)All kinds of mixed recycled materials
General Terms Means of transport: Ocean, Air, Express
Production time: 20-25 days after order
Twin screw extruder barrel and screw element


SPECIFICATONS
1. Extruder replace parts
2. High quality, high accuracy
3. Screw: W6Mo5Cr4V2.38CrMoAl. SKD11. SACM645 etc

Description:
The flexible modular principle is realized with screw barrel sections from the wide
Range ofdifferent designs possible. Fast, intensive and uniform heating ofthe screw
Barrel section is ensured by electrical heaters. The barrel sections are cooled with
Water, by means ofan internal bore system, with bores arranged close to the inside
Barrel wall.

Barrel sections are available as:
Closed barrel section
Barrel section with opening for material feed or for devolatilization
The processing section is provided with stainless steel plates as a protection against
Accidental contact.
Screw Elements: High-speed steel W6Mo5Cr4V2, nitrogen treatment.
Screw Shaft: High performance alloy steels, 40CrNiMoA; With standing high load, Etc
Description
The inter meshing screws co-rotate and wipe each other with narrow clearance so that
No residues are left in the screw flight and clean effort is thus reduce.
Screw elements with various pitches and lengths
Kneading blocks with various angles ofstagger, numbers ofkneading disks and disk
Widths.
Screw tips to fix the screw set axially
Gear teeth connection to ensure power flow between the screw shaft and screw
Elements.

Features:
1. Screw components designed by computer aids is kneading type, has excellent self-cleaning function, the new kneading block design effectively avoid the problems of overheating and energy consumption.
2. According to process system and formula requirements, the unit can optimize its L/D ratio, barrel structure, screw array, venting number and location, feeding method, electrical control methods etc. For rational allocation.

Packaging for exports:
Package: Wooden case or Using Anti-rust oil processing, then use stretch film cover extruder against moisture damage.
Shipping: By sea or By express

Our machine types:
1. Co-Rotating Parallel Twin Screw Pelletizing Extruders
2. Single Screw Pelletizing Extruders
3. Die Face Cut (Air Cooling) Pelletizing Extruders
4. Double Stage / Double Degassing Recycling Extruders
5. Crushers, Mixers, Storage Tanks, Vibrators, Granulators, Blowers
6. Extruder spare parts
We are manufacturer of twin screw extruder, also can supply all the spare parts.
Like screw, barrel, feeder, die head electric controller and gearbox.
Base Material 1) 38CrMoAlA(JIS SACM645) 2)Cr12MOV(JIS SKD-11)
3) 4Cr5MoSiV1(JIS SKD-61) 4) 42CrMo(AISI 4140)
Bimetallic Alloy Material 1)Fe-based alloy 2)Ni-based alloy/Deloro alloy
3)Co-based alloy 4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide
Surface Treatment
1.Heat treatment 2.High frequency treatment
3.Nitriding treatment Nitrided case depth: 0.50-0.80mm
Nitrided hardness: HV850-1020 (HRC57-65)
4.Hard chrome plating treatment Chromium-plating layer depth: 0.05-0.10mm
Chromium-plating layer hardness: more than 950HV
5Nickel alloy plating treatment Bimetallic barrel: centrifugal casting (Inlay alloy)
Bimetallic screw: plasma alloy coating spraying
Bimetallic layer depth: 0.8-2.0mm
Bimetallic layer hardness: HRC 57-72
Basic Information
Nitride Brittleness ≤Grade Two
Surface Roughness Ra0.4um
Screw Straightness 0.015mm
Hardness after hardening and tempering 0.025~0.10mm
Material Application 1)General plastics
2)ABS,PA,PC,PE,PET,PS,PU,PVC,U-PVC
3) PA+GF (Glass Fiber)
4)Flame-resistant reinforced plastics
5)Modified engineering plastics
6)All kinds of mixed recycled materials
General Terms Means of transport: Ocean, Air, Express
Production time: 20-25 days after order

Stainless Steel Electric Tricycle

Stainless Steel Electric Tricycle,Light Weight Stainless Steel Electric Tricycle,Safety Stainless Steel Electric Tricycle,Energy-Saving Stainless Steel Electric Tricycle

Xuzhou Tianying Automobile Co.,Ltd , https://www.qjwzwelectrictricycle.com