Home Appliances,Household Air Cooler,Smart Battery Charger,Universal Battery Charger SHAOXING SUNSHINE ELECTRONIC CO.,LTD , https://www.crownlamp.com
1, mold temperature. Mold temperature is one of the key factors that affect the molding. Generally, the mold temperature is higher than that of micro-filling. Unbalanced mold temperature will seriously affect filling. Therefore, in the case of mass production, regular replacement of cooling water and cleaning of the mould waterway are required.
2, molding time. If the holding pressure is too high and the pressure holding time is too long, it will cause whitening, cracking, and surface inequality defects when the through hole area of ​​the product is released.
3, the material is warmed up. Dry before injection, especially the glossy plastic parts should require long-term preheating and drying.
Because the mold temperature has a great influence on the molding shrinkage, and it also directly affects the mechanical properties of the injection molded product, the mold must be kept within the specified temperature range, and the mold temperature must not change with time. The temperature difference between the cavities of the multi-cavity mold must not change. To this end, temperature control measures must be taken in the mold design to heat or cool the mold, and in order to minimize the temperature difference between the mold cavities, the cooling circuit must be designed. Generally, a cooling water circuit can be separately provided for each cavity, and a flow control device can be provided at the outlet of each cavity cooling water circuit.
Jinfeng Technology
In injection mold design and production, injection molding has the following three points: