Car failure has always been a problem affecting this rider. Many riders are troubled by car failures. Car breakdowns have seriously affected the use of cars by car owners, so car owners need to know more about them in their daily lives. Some relevant knowledge of automobile faults, we must be able to do our own hands to detect and discharge some simple car faults. The following are some of the solutions and precautions for the car electric glass lifter. I hope that the riders can understand. 1. Fault phenomenon: The glass can not be fully raised and lowered in place, or it can be stopped when it is taken. Analysis: Generally, the above situation is mainly caused by the door modification. The guide groove makes the resistance of the glass increase during the lifting process, the motor load increases, and the motor current rises. If the power switch protection current is exceeded, the glass lifter switch will turn off the power supply. To prevent the motor from being damaged due to overcurrent. Maintenance: Find the location of the glass jam; trim the modified door panel; clean the strip guide to make the glass rise and fall smoothly; check if the glass is installed properly. 2. Fault phenomenon: The glass lifter does not move at all. Analysis: Check the power switch first, whether it works normally; then check the motor and lifter, whether the glass guide is stuck. Finally determine the faulty part. Precautions: The glass lifter cannot operate the switch immediately after the glass is raised to the top or lowered to the bottom. It takes a few seconds to delay, otherwise the glass lifter may not work due to the action of the motor protector, and the glass lifter is faulty. The above is some of the problems related to car breakdowns compiled by the editors for the riders. I hope that the riders can understand this. Plastic Fastener,Plastic Locking Clips,Plastic Snap Clips,Plastic Panel Clips Ningbo Hinix Hardware Industry & Trade Co., Ltd , https://www.hinixpack.com
Maintenance analysis:
