Conversion For Warp Knitting Machine Conversion For Warp Knitting Machine,Ebc Conversion Parts,Electric Let Off,Carbon Needle Bar For Knitting Machine suzhou cotex international Co.,Ltd , https://www.cotexmill.com
When repairing the hexagonal bed guide rail accuracy, it should meet two requirements: 1. Repair the linear accuracy of the guide rail. 2. Restore the guide rail as a reference for the support and guidance of the multilateral lathe.
When repairing the rail surface of the six-sided multilateral lathe bed, the position accuracy between it and other transmission parts cannot be guaranteed due to the wear of the rail surface. In order to ensure the restoration of the position of the guide rail surface and the mutual position between the transmission parts, and in the subsequent repair process, it is not necessary to recalibrate and displace the original assembly position of other parts on the bed body. Therefore, when repairing the rail surface, it is necessary to use the non-abrasive mounting surface of the bed body as a reference surface for measurement and repair. It is a complicated and delicate process.
The six-sided multilateral lathe is mainly suitable for the production of lathes of hexagonal machine parts, and due to the very high precision requirements of the hexagonal parts, the precision requirements for the six-way multilateral lathe rails and rails are very high. Therefore, when errors occur in the production of six-sided multilateral lathes, the multilateral lathes should be timely repaired to ensure the orderly and effective production. The wear of the guide rail surface also leads to the loss of accuracy. Here we talk about how to repair the guide rail surface.