1. Hazard source: Open two dampers at the same time. Description of risk and its consequences: It is easy to cause short circuit of wind current, and there is no wind or breeze in local area. Pre-control measures: During the process of transporting equipment, when passing a damper, the other damper must be closed. It is forbidden to open two dampers at the same time. 2. Hazard source: The surrounding environment has not been checked. Description of risks and consequences: It is easy to affect the normal operation of the winch driver. Pre-control measures: Check the safety of the top support within 5m of the surrounding environment of the winch, and the wire rope is free from obstacles, which is easy to operate and overlook. 3. Hazard source: The winch is not checked. Description of risk and its consequences: It is easy to cause the winch to shake or shift and hurt the driver. Pre-control measures: The winch is fixed firmly with the base base. 4. Hazard source: No safety inspection has been carried out. Description of risks and consequences: Easy to cause accidents. Pre-control measures: Check the brakes and working brakes (off-closers). The brake belts are complete without breakage, and the wear is not over-limit. The bolts, pins, tie bolts, back limit pins, hook heads, rope skins, etc. are all complete and complete. Bending, deforming, there must be a protective net in front of the winch. 5. Hazard source: No wire rope inspection. Description of risks and consequences: It is easy to cause wire rope strain or sports car injury. Pre-control measures: The wire rope must meet the requirements, no broken wire, broken strands, bent, knotted, and fixed on the rope end of the drum. 6. Hazard source: The signal worker is standing in an improper position. Description of risks and consequences: It is easy to cause wire rope injuries. Pre-control measures: Signal workers must stand in a safe position, and pedestrians are strictly prohibited in the ropeway. 7. Hazard source: The signal worker does not send according to the specified signal command. Description of risks and consequences: 1 It is easy to cause accidental pulling and causing accidents; 2 It is impossible to stop in time after an accident, so that the accident will expand. Pre-control measures: Signal workers must carry out signal transmission accurately to ensure the normal operation of the vehicle. 8. Hazard source: The winch leaves the console during operation. Description of risks and consequences: It is easy to cause problems and cannot stop in time. Pre-control measures: During the operation of the winch, the operator must not leave the console. 9. Hazard source: The winch does not implement the remote operation button. Description of risks and consequences: It is easy to cause problems and cannot stop in time. Pre-control measures: The winch must be controlled remotely. It is forbidden to operate the switch directly. 10, the source of danger: driving when pedestrians. Description of risks and their consequences: those who are prone to bruises or crush injuries. Pre-control measures: pedestrians are strictly prohibited when the winch is running. 11. Hazard source: The lifting speed is not stable. Description of risks and their consequences: Easy to cause a drop or rollover accident. Pre-control measures: During the process of transporting the bracket, the speed should be slowed down. Mechanical Parts,Gear Washer,Gear Box Parts Washer,Shift Lever Bushing Xinchang Newsun Xintianlong Precision Bearing Manufacturing Co.,Ltd , https://www.xtlbearing.com
Identification of hazard source for working face transport