All Metal Casting parts need to have wax molds to produce the product. Only a mold with high production precision and reasonable structure can ensure the production of qualified Investment Casting Parts. Therefore, the production of molds is very critical for investment casting. First of all, we must ensure the accuracy of the molds. Only high-precision molds can produce high-precision products. It is also necessary to consider the position of the gate to ensure the balance of the wax flow, the convenience of subsequent removal of the gate, and the importance of the size of the gate position; and the rationality of the mold structure, only the design is reasonable. The mold structure can ensure efficient production and long mold life.
SCZY has its own mold manufacturing workshop, and the overall accuracy of the mold can reach ±0.02mm. Before manufacturing the mold, we will systematically analyze the mold structure and gate position to ensure that the produced mold can produce products accurately and efficiently.
Casting Mold Development,Investment Casting Mold Development,Casting Mold For Investment Castings,Casting Mold Shenzhen SCZY Technology Co.,Ltd , https://www.szsccasting.com
JUMSEN COOLING TOWER , SAVE 30%-50% OF POWER
Jumsen series MSN cooling towers have been designed for cross flow type with Low Noise Motor and Fan. The compact design is suitable for Equipment Cooling, Industrial Process Cooling and Air Conditioning.
Product Features
International Standards
Series MSN cooling towers have been designed according to the international standards featuring light weight structure, easy transport, easy hoisting, and easy site installation.
Low Noise & Easy Maintenance
Series MSN cooling tower use high tension V-belt reducers, which are correspond to the low noise axial fans featuring silent operation and easy maintenance.
Light Weight, Smaller Footprint and Multi-Cell Installation
Comparing with other types of cooling tower, MSN features lighter operational weight and smaller footprint. Also the combinative multi-cell structure is suitable for large cooling requirement and future expansion.
High Efficiency Non-Clog Distribution System
Water distribution system consists of spray header and branches with large orifice, non-clog nozzles to spray water evenly on the surface of fill to promote the best mixing of air and water.
High Efficient Fill
Unique design of vacuum-formed and chevron configuration type fill with ripple surface facilitates even spread and long duration of water drop and free of deposits and scales to get best heat transfer.
Long Service Life
MSN tower components are made of weatherproof and anticorrosive materials. Casing is constructed of anti-ultraviolet FRP which features soundproof and non-decayed merits with fine streamline outlook. Basin are made by F.R.P. Fill and inlet louvers are by P.V.C. Supporting rack is made of light weight steel. All the steel parts are hot dip galvanized so as to prolong the service life.
MODEL
Flow(m³/h)
Tower Dimension(mm)
Fan diameter(mm)
Motor rate(KW)
Water pressure(Kpa)
Weight
Length
Width
Height
Dry
Wet
MS-100L/SB
100
1980
3200
3600
1450
2.2(4)
36
860
2260
MS-125L/SB
125
2320
3600
3600
1750
2.2(4)
36
1080
2830
MS-150L/SB
150
2600
3800
3600
2100
4(5.5)
38
1180
3550
MS-175L/SB
175
2930
3800
3600
2100
4(5.5)
38
1300
3810
MS-200L/SB
200
3040
4300
3600
2400
5.5(7.5)
38
1600
4020
MS-250L/SB
250
3000
5300
4100
2400
5.5(7.5)
40
2380
5280
MS-300L/SB
300
3250
5550
4100
2700
11
40
2580
5650
MS-350L/SB
350
3500
5800
4100
2700
11
40
2850
6270
contact detail
Name : Ms. Yanyan Xie
Mobile : 86 - 592 - 5970673
If you have any question or requirements, please don't hesitate to contact us.Thank you for browsing our website and reading our products .
Products name
Â
Products Design
The compact design is suitable for Equipment Cooling, Industrial Process Cooling and Air Conditioning.
Services
We can supply comprehensive service for you with professional production, sales, shipping and after-service team.