The use of asphalt heat pump precautions

The use of asphalt heat pump precautions:

1. The asphalt heat pump must determine the running direction before starting the machine and must not be reversed.

2. Asphalt heat pump is forbidden to operate under no media condition so as not to damage the stator.

3. If the G-type single screw pump newly installed or shut down for several days cannot be started immediately, it is necessary to inject proper amount of oil into the asphalt insulation pump body first, and then start the pipe wrench after a few revolutions.

4. After conveying highly viscous or granular and corrosive media, rinse with water or solvent to prevent clogging, so as to avoid difficulties in starting the next time.

5. The winter should be queuing fluid to prevent freezing.

6 During the use of the asphalt heat-insulating pump, the bearing box should be regularly lubricated. If there is any seepage at the shaft end, it is necessary to dispose of or replace the oil seal in time.

7. If an abnormal situation occurs during operation, immediately stop the cause and troubleshoot.

Asphalt heat pump is produced and used in accordance with certain methods and principles during use to ensure that it can produce good value and contribution in the production practice. It shows good development and status in the industry and meets the development needs of the industry.