HONY®PU Polyurethane sheet, rod and tube is extremely abrasion resistant and can be custom cast in a wide range of sizes, shore hardnesses and colours. PAR Group also have the capability to machine Polyurethane utilising highly advanced in-house CNC technology. The following are the standard sizes available with many more available upon request.
HONY®PU Polyurethane sheet, rod and tube is popular for a wide range of industrial applications including linings, scrapers, gaskets and machined components. It can be manufactured in the following sizes and shores hardnesses and in a variety of colours. If a specific colour is required, please state at the point of enquiry.
Transparent Polyurethane Pu Sheet Available
Shore Hardness(A): 35,40,45,50,55,60,65,70,75,80,85,90,95
Maximun sheet size (mm): up to 4100x1750
Thickness(mm):2mm up to 100mm(dependent on sheet size)
Color: Various - please state colour required at point of enquiry .
Polyurethane rod is commonly used for a range of industrial applications including specialist seals, spacers and machined into components. It can be manufactured in the following sizes and hardnesses as standard with specific colours are available upon request.
Polyurethane Rubber Sheet Rod Available
Shore Hardness(A): 35,37,40,45,50,55,60,65,70,75,80,85,90,95
Shore Hardness(D): 60
Color: Black , Blue , Natural , Red , Yellow
Rod Diameter(mm) : 12,15,21,25,31,35,37,40,50,63,70,76,79,81,82,88,100,125
Rod Length (mm): 300 , 500 , 1000
Polyurethane tube can also be manufactured and is commonly used for applications such as rollers, protective collars and machined components. Polyurethane tubes are made to order with many more sizes and specific colours available upon request.
Polyurethane Rubber Tube Available
Shore Hardness(A): 35,40,45,50,55,60,65,70,75,80,85,90,95
Minimum inside diameter(mm) : 12
Maximum outside diameter(mm): 125
Minimum wall thickness (mm) : 4 up to 100mm long , 5 over 100mm long
Maximum tube length (mm): 300 ( less than 32id)
Color: Various - please state colour requirement at point of enquiry
Wear resistance polyurethane PU sheet Characteristic:
1.Resilience (high or low)
2.Excellent abrasion resistance
3.Light weight relative to metals / Lighter than metals
4.Impact and shock resistance
5.Bonding to metals and plastics
6.Compression modulus (high to low)
7.Cut and tear resistance
8.Flex fatigue resistance
9.Friction (high or low)
10.Good electrical properties
11.Oil, solvent, water, ozone resistance
12.Age resistance
13.Mold, mildew, fungus resistance
14.Non-marking characteristic
15.High load capacity
16.Chemical resistance
17.Machinability
PU,Polyurethane Application:
PU sheet is used for shock absorption backing plate, spacer and springof metallurgy, coal mine, petroleum, automobile, building material, sports, heavy machine and large press equipment as well as die of metal plate and tube.
Polyurethane Moulding
PU sheet , rod & Tube
Polyurethane Sleeves
Polyurethane Roller Coating
Polyurethane Roller Sleeves
Polyurethane Gaskets
Polyurethane Cord & Tube
Polyurethane Drive Bands
Polyurethane Belting
Polyurethane Brick Grabs
Polyurethane Cutting Sticks
Polyurethane Scrapers
PU to Metal Casting
Polyurethane Spray Coating
Polyurethane Conveyor Belts
Pu Sheet,Polyurethane Sheet,MDI,TDI,CAST ELASTOMERS,Erapol EMD96A Hony Engineering Plastics Co.,Ltd. , https://www.honyplastic.com
The industry as a whole: 2014H1 has excellent earnings, closely following five main lines of investment
In 2014H1, the revenue growth rate of the automotive industry declined slightly, but it was still within a reasonable range. The overall performance of the industry's profitability is better than that of the revenue. Performance of the sector: Components> Passenger cars> Commercial trucks> Commercial buses. The overall decline in industrial operating capacity was mainly due to the obvious upward pressure on accounts receivable. Looking ahead to 2014H2, the overall prosperity rate of the automotive industry is expected to increase steadily, which is mainly due to the following: H2 sales season of automobile sales + N4 impact of commercial trucks gradually eliminated + acceleration of new energy vehicles. It is recommended to actively pay attention to five investments.
Passenger car: began to fall, 2014H2 even see the increase in concentration
Passenger car demand declined slightly in 2014H1, and the autonomy of joint ventures intensified. Earnings growth was faster than revenue, thanks to improved gross margins and continued high growth in investment income. Worry-free cash flow as a whole, but the back section pressure continued to rise <br> <br> commercial trucks: dropped significantly, highlighting opportunities H2 emission upgrade
The growth rate of demand for 2014H1 dropped significantly, among which the performance of light trucks was worse than that of medium-heavy trucks. The overall profitability still improved, mainly due to the increase in the proportion of medium-to-heavy cards and the improvement in the gross profit margin of the fourth national product.
In 2014H1, the overall cash flow deteriorated, and the pressure on accounts receivable was highlighted.
Commercial Bus: Continue to decline, 2014H2 new energy bus accelerates
2014H1 demand continued to decline, with large and medium-sized customers having the greatest impact. The overall decline in profitability was mainly due to the drop in gross profit margin caused by the decline in the proportion of Dazhong Kezhong and the poor cost control effect. In 2014H1, the deterioration of cash flow was exacerbated and exceeded seasonal factors. We expect H2 to improve.
Parts: Excellent performance, growth is still the main tone
The 2014 H1 parts and components industry followed the entire vehicle, but the overall revenue growth performance was better than that of the entire vehicle, mainly from joint venture customers' development and global industrial chain transfer. The profitability was superior to the revenue growth, which was mainly due to the proper cost control and the stable gross profit margin. 2014H1 operating capability remained stable, and individual stocks continued to diverge.
Looking into 2014H2: Deep Development of the Five Main Lines
1) The anti-monopoly of the auto industry will continue to deepen, giving China's auto service market an opportunity for development. It is proposed to actively deploy Jingu shares; 2) The new energy auto industry continues to ferment, and it is recommended to actively deploy the "Guangdong Accomplishment" and focus on "Asia-Pacific stocks". , "BYD," "Yutong Bus," and "JunSheng Electronics"; 3) Mid-to-long-term strong passenger car companies benefit from increased concentration, actively deploy reversed "Great Wall Motors", growth "Changan Automobile", and value-based "Shangqi Group"; 4) Accelerated development of the clean diesel vehicle industry chain, continued to be optimistic: "JMC", "Silver Wheel", "Weifu Hi-Tech"; 3) Continuously optimistic about the future development prospects of the automotive electronics industry, and actively concerned: " Asia Pacific shares, Junsheng Electronics, and Yunyi Electric.
HONY®PU Polyurethane sheet rod and tube Features
Key Features
Key Features
