At present, there are no less than 1,000 companies related to industrial robotics in China, but most of them are self-assembled after purchasing key parts from abroad. Therefore, prices are not dominant, while domestic independent research and development such as speed reducers, control systems, and servo motors are in accuracy. There is still a gap between the life expectancy, speed, and other technical indicators. People in the industry generally believe that China's robotics technology and foreign standards at least five to 10 years. “The speed reducer is one of the three core components of industrial robots, and its technical content is particularly high. At present, the localization of reducers is really difficult.†Zhang Jie, General Manager, Zhejiang Laifu Harmonic Drive Co., Ltd. Strategic robotic media reporter said. At present, China’s speed reducers are facing important challenges and opportunities. On the one hand, domestic robots are expecting their own branded speed reducers. On the other hand, companies are facing the dual pressures of technology and capital, and internationally renowned brands of speed reducers are also constantly cutting prices. And expand its market share in China. From the perspective of harmonic reducer, the domestic reducer has a certain distance compared with international famous brands, and the recognition of high-grade reducer is relatively low. Therefore, to break through this status, it is necessary to overcome the current situation. The technical bottleneck of the wave retarder depends on its own technology and its own efforts to develop products that compete with similar foreign products. Only in this way can we occupy a place in the domestic and foreign markets. This road has a long way to go. It cannot be changed between days and nights. However, domestic reducer companies also have certain advantages, such as localized after-sales service and technical support. Relatively speaking, domestic companies have the same cultural background, and there are more favorable conditions for pre-communication, technical exchange, or post-sale service, problem feedback, and resolution. Metal Body Square Water Cooling Tower This series of products run stable, low noise, energy-saving, in office buildings, shopping malls, hotels, residential areas and other central air-conditioning supporting the use of better results. Metal Body Square Water Cooling Tower,Tower Water Cooler,Water Cooled Cooling Tower,Tower Cooling System Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.arkfluid.com
The company's standard cooling tower according to the international design conditions design, can also provide customers with non-standard operating conditions or specific sizes under the special, special design.
The circulating water pump suction port shall be located below the water level of the cooling tower catchment basin, and the cooling tower outlet pipe shall not be allowed to be higher than the maximum water level of the catchment basin.
Pipe mounts should be pipe racks and cooling towers should not be allowed to directly bear the weight of the pipes.
The rehydration pipe of the cooling tower should be provided with a support stand to avoid vibration of the pipe when the float valve is rehydrated.
Rehydration pressure should be below 5m water pressure, national standard
The flannage pressure is 1.0Mpa.
When two or more units are assembled, our company will provide a connecting balance tube to balance the chassis water level. The tower top inlet should be set with a conditioning valve in order to enter each
.The water level of the tower is uniform.
The noise is measured at dm1.13VL-W at the equivalent diameter of the cooling tower (Dm1.13VL*W), 1.5 meters above the ground height, wherein L and W are the shape rulers of the tower
inch long and wide).
The use of cellular continuous blister series of diversion,heat dissipation, water collection three-in-one native filler, the whole suspension, gravity cloth water, low drop of water, with cold effect
High, low energy consumption, less drift water, less noise and so on, floating water rate is less than 0.001%.
When connecting different types of towers, the bottom basin water level height of different types of towers must be taken into account, and the base height must be adjusted to maintain the water level balance of the towers.