Often said that rescue is a hard-working, often see rescue workers shrinking during the day in the hot sun, wind and rain. Many people’s diets and other issues often cannot be properly resolved. Especially in the evening, the working environment of rescue workers is especially bad. Only the emergency vehicles that couldn't talk were accompanied by them. In order to effectively maintain the combat effectiveness of personnel and relieve the labor intensity of rescue personnel, strengthening humanity in designing will greatly benefit the protection of the physical health of the rescue personnel and their sustained combat effectiveness. Design should be considered humane rescue vehicles from the following three aspects. The first is the equipment installation and termination. In the design process, timeliness is a key requirement for installation and termination. That is, the shorter the process used for installation and labor, the shorter the personnel exposure is, the more likely it is to reduce the risk of illness caused by the disaster. This requires that the layout of the equipment must first be orderly and reasonable. In addition, the high degree of integration and fast and effective connection must be reflected in the rescue parts of each unit. In the end, the weight of the individual parts of the rescue components shall be within the tolerance of the single human handling. This can effectively reduce exposure and auxiliary working hours. The second is monitoring. With a highly centralized control design, the control and power control of the monitoring equipment should be centralized. Emergency rescue personnel can observe the surrounding environment and rescue equipment system changes in real time through the monitor. Once the situation is different, rescue personnel can respond in a timely manner without having to rush to the control center for operation and processing from an abnormal location. In the rescue area, personnel are often confused, and outdoor control may be affected by sudden changes. Therefore, special monitoring cabins should be designed. Effectively protect the health and safety of rescue workers. The third is the break of personnel and the addition of functional support facilities. As a device developer in the design phase should take into account the actual rotation and rest needs of rescue personnel. Clear the general emergency rescue staffing system and understand that only one or two personnel are required to shift duty in the process of continuing rescue or waiting for insurance, while other rescue personnel in a group of four persons can take turns resting. Correspondingly, in the vehicle, a reasonable area is planned as a rest area, and all emergency rescue personnel are provided with basic facilities for eating and drinking. The outlets for people to cook water and charging are reserved, and the rest and supplementary performance are more humanized. This article is only his own opinion, but it needs to be understood that only a large amount of actual research support and supplemented with the real concern of the rescue personnel's heart can complement the humanization shortcomings of the emergency vehicle. 1.What is UVC? 3535,2 pads,5 pads,Surface sterilization,quartz lens Bingri Electronic Technology (Shenzhen) Co., Ltd. , https://www.bingriuvled.com
UVC: The wavelength is between 100-280nm, but because the wavelength below 200nm is vacuum ultraviolet, it can be absorbed by the air, so the wavelength of UVC that can penetrate the atmosphere is between 200-280nm. The shorter the wavelength, the more dangerous it is. Can be blocked by the ozone layer, and only a small amount will reach the surface of the earth.
2.What is the mechanism of UV sterilization?
UV can destroy the DNA (deoxyribonucleic acid) or RNA (ribonucleic acid) molecular structure of microorganisms, so that bacteria can die or cannot reproduce, so as to achieve the purpose of sterilization.
3.Where can UVC LED be used?
According to different application scenarios, we may be able to see UVC LEDs in these applications in the future:
Surface sterilization: high-frequency public contact surfaces such as medical appliances, maternal and child products, smart toilets, refrigerators, tableware cabinets, fresh-keeping boxes, smart trash cans, thermos cups, escalator handrails and automatic ticket machine buttons, etc.;
Still water sterilization: water tank, humidifier, ice maker;
Flowing water sterilization: Flowing water sterilization module, direct water dispenser;
Air sterilization: air purifier, air conditioner.
The wavelength range of UVC LED is generally around 260nm, 275nm and 280nm.