Now many CNC cutting machine manufacturers will provide a service after the customer purchases their own CNC cutting machine. That is to install and debug the CNC cutting machine for customers free of charge. Need to help customers to install and debug the machine, today we will give you a detailed explanation of the installation process of the gantry CNC cutting machine.
Xiaomi Mouse And Keyboard,Miiiw Portable Keyboard,Xiaomi Keyboard Set Manufacturer in China
Xiaomi Mouse And Keyboard,Miiiw Portable Keyboard,Xiaomi Keyboard Set,Xiaomi Mouse Set
China Xiaomi Mouse And Keyboard,Miiiw Portable Keyboard manufacturer, choose the high quality Xiaomi Keyboard Set,Xiaomi Mouse Set, etc.
Xiaomi Mouse And Keyboard,Miiiw Portable Keyboard,Xiaomi Keyboard Set,Xiaomi Mouse Set Shenzhen Newway Technology Co., Ltd. , https://www.sznewway.com
The installation process of the cutting machine is mainly divided into the following ten steps:
In the first step, after we get the packing box, we first unpack the box, then place the plasma power supply in the middle of the left side, insert the wood board, and place the control cabinet on the left side of the cutting machine to operate the gantry type CNC cutting. Machine workers can see the entire cutting machine and the cutting process.
In the second step, remove the drag chain package on the left and place it parallel to the cutting machine. Why do you want to place it in parallel? The main reason is to be able to operate the cutting machine normally.
In the third step, the six anchor bolt adjustment seats that are equipped with random devices are used to level the equipment.
The fourth step is to connect the power cable of the plasma power supply to the workshop's power supply (three-phase 380V, 50HZ) and the power is 8KW. This place must pay attention to, must choose the three-phase 380V, if choose the common domestic 220V, that cannot be the normal operation of the cutting machine.
Part 5. The grid or steel plate that connects the ground of the plasma power supply to the workbench.
The sixth step is to connect the power cable of the control cabinet to the workshop's power supply (three-phase 380V, 50HZ) and the power is 3KW. Note: The 3KW here is not the same as the 8KW in the fourth step above. Do not make mistakes.
Step 7: Connect the plug on the back of the computer to the control cabinet. The monitor will be installed and connected with the power supply and signal cable.
In the eighth step, connect the inlet and outlet pipes and let the water depth in the sink reach 80mm. Then connect the compressed air to the inlet of the plasma power supply and adjust the pressure to 5.0.
The ninth step, turn on the main power, control cabinet key switch, host power supply, display and plasma power. Note: Be sure to follow the instructions of the plasma power supply, system operation manual and user manual. When not skilled, please do not modify the parameters already set in the system.
The tenth step, test cut. When it is found that the cutting quality is not good and cannot be solved, the electrodes and nozzles of the plasma torch should be inspected and replaced if damaged.
The above is what Xiaobian learned about the installation steps of the Gantry CNC cutting machine. If you don't install it, don't worry, the installation process is usually done by the seller for you. Only when the installation and commissioning meet the customer's requirements will it be completed.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /