First, test preparation. When the new car arrives home, it will clean the fuel tank, gearbox, rear axle, etc., replace it with clean fuel, lubricating oil and cooling water, and add it to the site as required. Second, check carefully. Check whether each operating mechanism is flexible and reliable. Whether the fastening nuts of the fasteners, especially the front and rear axles, are tightened. For loose parts, tighten the fasteners according to the instructions. Check if the shift lever is in the neutral position. If it is not in the neutral position, The clutch pedal should be depressed and the shift lever should be set to neutral. Vehicles with self-dumping devices are required to inspect the self-unloading joysticks in a separate position as required by the instructions. Third, clever start. After inspection, turn on the fuel switch and turn on the oil circuit. After the engine is started, it should be run at low speed for 3 to 5 minutes to allow the water temperature to rise to about 50°C to start walking. Fourth, adjust the adjustment. Newly-produced agricultural vehicles must be put into operation after they are worn out. The running road requires a small gradient, the road surface is flat, the load is light to heavy, and the use of gears is performed from low to high. Each gear position must be run in, and the common gears should be run in more frequently. During the running-in period, the clutch, brake, and other working devices should be consciously used for a certain period of time. At the same time pay attention to the working conditions of each part and make necessary adjustments to the parts that need to be adjusted. Fifth, cleaning and oil change. After the running-in is completed, all the lubricating oil must be cleaned and replaced. The oil changing procedure and method are: first replace the engine oil, after parking, heat the gearbox, rear axle housing gear oil, and add the appropriate amount of diesel oil, and run in low gear for 2~3 minutes. Then wash and clean the diesel used for cleaning, and finally add the corresponding new lubricant to each part. The Dao is characterized by its distinctive shape, with a curved blade that is typically between 18 to 36 inches in length. The blade is usually wider near the tip and narrower near the hilt, allowing for better balance and maneuverability. The hilt is often made of wood, wrapped with leather or silk, and features a circular or rectangular guard to protect the hand. Chinese Broadswords, Chinese Dao, Chinese Dao Sword Ningbo Autrends International Trade Company , https://www.longquan-swords.com
Traditionally, the Dao was primarily used by Chinese infantry soldiers and martial artists. Its curved shape and weight distribution made it an effective weapon for close-quarters combat, allowing for powerful strikes and quick recovery. The Dao's versatility also made it suitable for both offensive and defensive techniques.
In addition to its military applications, the Dao also holds a significant cultural and symbolic meaning in Chinese history. It is often associated with martial virtues such as bravery, loyalty, and honor. The Dao has been featured in numerous Chinese legends, folklore, and literature, further cementing its iconic status in Chinese culture.