DYB Electric Transfer Pump For diesel, gasoline, kerosene, mineral spirits, Stoddard solvent and heptane Iron-based alloy powder is commonly used in plasma transfer arc welding (PTAW) due to its excellent mechanical properties and high resistance to corrosion and heat. This type of powder is typically composed of iron as the base metal, along with various alloying elements such as nickel, chromium, molybdenum, and tungsten. Fe Alloy Powder,Stainless Powder,High Temperature Powder,Iron Base Pta Welding Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.hvafspray.com
Explosion-proof permanent magnet motor with thermal overload protection
Built-in strainer, bypass valveÂ
Ball bearing construction, no lubrication requiredÂ
1" diameter, 12'hose with static ground wire and 1" manual nozzleÂ
nozzle boot that protects against dirt and contaminationÂ
2" threaded base for tank openingsÂ
Corrosion-Proof section pipeÂ
Rain proof.water proof
30-minute duty cycle/not for continuous operation
Options :
FM-40G meter in gallons or FM-120 meter in litersÂ
Automatic nozzle
Â
Technical Specification
Model:
DYB50-DC12B
DYB75-DC12B
  Body Material :
Cast Iron
Cast Iron
  Maximum flow rate :
15GPM(57LPM)
20GPM(76LPM)
  Explosion-proof motor :
1/4HP
1/4HP
  Voltage:
DC12 or DC24
  Inlet:
1"NPT
1"NPT
  Outlet:
3/4"NPT
1"NPT
  Threaded tank adapter:
2"NPT
2"NPT
  Nozzle hanger:
Yes
Yes
The specific composition of the iron-based alloy powder may vary depending on the desired properties and application requirements. For example, adding nickel can increase the strength and toughness of the weld, while chromium enhances the corrosion resistance. Molybdenum and tungsten are often added to improve the high-temperature strength and creep resistance of the weld.
Iron-based alloy powders for PTAW are available in various particle sizes, typically ranging from a few micrometers to several hundred micrometers. The powder is usually fed into the plasma arc through a powder feeder, which ensures a controlled and consistent supply of powder during the welding process.
During PTAW, the powder is melted and deposited onto the workpiece, forming a weld bead. The high energy plasma arc provides the heat necessary to melt the powder and the base metal, creating a strong and durable weld joint.
Overall, iron-based alloy powder for plasma transfer arc welding offers excellent weldability, high mechanical properties, and resistance to corrosion and heat, making it suitable for a wide range of applications in industries such as aerospace, automotive, and power generation.
Trademark: JH
Specification: 42*34*40
Origin: Wenzhou