How to achieve the camera's "wire counting" function? Here I will share with you the setting method of Hikvision Camera (DS-2CD7A46F-IES) "Over the line counting".
First, the setting of the line count
1. Check “Enable line counting” to enable camera count counting function ( Smart events must be turned off : for example, zone intrusion, etc., meaning that the line count and other events cannot be used at the same time)
2. Click "Smart Rules" to draw a valid line for line statistics. If you need to redraw the line, click ".
” button to delete the detection line, and then re-painted. 3. If the actual detection scene into the direction is different, you can click “
The button changes the direction of entry and adjusts the line count detection direction.
4. Enable OSD overlay to superimpose incoming and outgoing statistics in the upper right corner of the image. The overlay information only counts the number of the day.
5. Arming time: The default is to arm throughout the day, click on the time period of arming, you can display and adjust the arming time. If other times need to be set to the same arming time, click the green copy button on the right side of the time axis; you can set multiple arming time periods a day.
6. After the related parameters are modified, click the "Save" button to save the relevant settings.
(Note: If the device is restarted, the count will be cleared automatically, and it will be automatically cleared at zero every day)
Second, application
This interface can be used to count and export statistical data that is validly stored on the SD card or NAS storage installed in the network camera, for example, through the line count.
(Note; SD card or NAS storage must be installed)

Sack Gabion

Sack gabion is cylindrical basket made of 8x10 double twisted steel woven wire mesh, with mechanical characteristics higher than the ones suggested from EN 10223-3. It's filled with stones at the project site to form flexible and permeable structures used for emergency and river training works where local conditions require fast installation or where the water does not allow for easy access to the site and where underwater installation is necessary.
Sack gabions are supplied with steel reinforcing wires inserted during the manufacturing process to facilitate closing during installation. The wire used for the manufacture of gabion shall have a tensile strength between 3 80-550N/mm2 exceeding, in order to increase the tensile resistance of the finished products, what is suggested from EN10223-3. Wire tolerances are in accordance with EN 10218. Elongation shall not be less than 10%, according to EN 10223-3. Test must be carried out on a sample at least 25 cm long. Meantime the adhesion of the zinc coating to the wire shall be such that, when the wire is wrapped six turns around a mandrel having four times the diameter of the wire, it does not flake or crack when rubbing it with the bare fingers.

Sack Gabion Specification

Surface treatment: electro galvanized or hot dipped galvanized

Sack Gabion,Wire Mesh Sack Gabion,Coated Sack Gabion Box,Pvc Coating Sack Gabion

ANPING KINDELONG WIRE MESH CO.,LTD. , https://www.apkdlwiremesh.com