Our service 1. Provide the free consultation of the equipment  If you are interested in our products, please contact with us freely. Our service 1. Provide the free consultation of the equipment  If you are interested in our products, please contact with us freely.
Flexible lift gate is a flexibel soft curtain door, inside and outside the two curtains , curtains used between the aluminum beams connected with a vertically movable rail , the roof beams have levels not in the same straight line and hanger large plants in particular Be applicable , Flexible lift door installation does not take up interior space in the hole inside , When the first move to open the door , and finally superimposed over the hole , Off event curtain rail first and then fall down until its is completely closed
Door body composition :
The bottom of the door curtain rail aluminum beam beam seal top drive system and transmission of electrical control systems and safety devices
Flexible door features:
1. Light weight compared with other types of the same size door , flexible door lighter weight reduces the strength of steel at the top of the doorway architecture degree requirements ,
2. Small compared with the same specification of the machine style doors 2, footprint ,flexible installation in the door after the hole is turned on internally stacked above the hole , do not take up interior space , Large Span hole may be provided a plurality of movable rail the entire door into several independent stacking doors shorten the span of a single door so that the overall thickness of the door is reduced , further reducing the footprint
3. Rational layout flexible doors with movable rail rail can set different activities based on the specific circumstances of the door into the door several sizes of uneven accumulation of doors to make the building as a whole rational layout greatly reduces the overall architecture of the space and cost
4. The wind strength between two layers of high flexible door curtain as the bottom of an aluminum beam has a wind skeleton steel structure , By adjusting the beam thickness and spacing , which can resist wind pressure of any intensity , so the door can be flexible for use in any area
5. The tensile strength of the flexible door after door curtain is double polyester fabric , high tensile wire rope equipped with ultra-high hole suitable for large machinery such as aircraft hangars and repository
6. The curtain coated with vinyl coated with a waterproof sunscreen and smoldering performance , capable of sound absorption retardant insulation mildew proof and so on
7. Safe door , Cube with anti-lock break to ensure safety in case of accidental breakage of wire rope jammed in the door quickly experience anywhere rails , Multiple protection features mechanical and electrical installation to ensure t he safety of goods passing aircraft and other vehicles and personnel , the movable rail is also equipped with anti-fall device , you can ensure reliable parked at the top of the hole after the movable rail is raised without falling , The bottom of the door is equipped with and airbag , it will immediately rebound to rise until the safety door drops open when obstacles encountered in the process , You can also install infrared protection device on the door
PVC flexible gate,pvc high speed gate door, pvc high speed rolling gate door, flexible rolling doors,fast doors SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , http://www.hongfahsrud.com
Puffed corn wheat snacks food extruder/machines
Brief introduction
Core filling snacks machinery can take corn, rice, wheat, oat, rye and other grains as materials to produce extruded snacks, with crispy taste and lively shape, Core-filling snacks machine is designed according to market demand. We can get different shapes: round, triangle, square, stars, flower, etc
  This processing line from feeding, extruding, shaping ,cutting , oil spraying to finished products are done once time automatically. Visible auto-temperature controlling system, make the temperature-controlling to be more direct-viewing, parameter to be more precise.
   The screws are made by ally steel and special craft, the screw life is longer, uses building block system structure, may combine willfully.The forced lubrication system can guarantee equipment transmission longer life.
China standard industrial voltage for the machine:
Three phases: 380V/50Hz, Single phase: 220V/50Hz, We can make it according to customers' Local voltage according to different countries (400V 415V 480V ).
Processing Flow ChartÂ
Mixing-Extruding-Shaping-Conveying---Baking-Spraying--Seasoning
Equipments ListÂ
Mixer--Screw Conveyor-Twin-screw Extruder-Core Filler---Multi-Function Shaper-Big elevator---Five-layer Oven-Elevator-Oil Sprayer flavoring line
Technical parameters:Â
Model ParameterÂ
KS-65C Processing Line
KS-65D Processing Line
KS-70A Processing Line
Installed capacity
63.41KW
52.13KW
86.06KW
OutputÂ
100-150Â KG/H
100-150 KG/H
250-300KG/H
Dimension
18000*1200*2000MM
23500*1800*2600MM
26000*2000*4000MM
Packing
   Every machine is packed with great care and tough material. It is packed with cling films first and then film bags. At last, it is packed with wooden case which is reinforced with the iron bar on the top and bottomWith this kind machine, all our laser machine can protect well during long trip by sea or by train.We can transport machine by boat or by training, according to your requirement.
1. What's the pre-sale service of your company?
2. Provide the standard device and the flow chart
3. According to the clients' special requirement, offering the reasonable plan and free design helping to select the equipment
2. What's the service during the sale?
1. Help client design the factory and offering professional advice, free engineering drawing for the factory layout.
2. Welcome to visit our factory or the domestic clients' factory.
3. Inspect the machine before leaving the factory.
3. What's the service after the sale?
1. Oversea install and debug the equipment.
2. Train the first-line operator.
3. Provide the basic formula
4. Supply with 12 months warranty and life-time maintenance.
1). Operator Needed: 3-5Â
2). Guarantee time: one yearÂ
3). We provide Turnkey Project Â
      a. Provide factory layout according to your factory size in advance.Â
      b. Provide the recipe when your esteemed company cooperate with us. Â
      c. Before place the order, we invite you to visit us and make demonstration for you in workshop Â
      d. Before delivery the machines, we invite you to inspect all the machines.Â
      e. Installation and commissioning in your factory for 15daysÂ
4). Payment terms: 30% T/T as down payment, 70% by irrevocable L/C at sight or T/T before  delivering.Â
5). Delivery time: 30-40 days after receipt the deposit, we have extruder, dryer and flaking machine in workshop.
Puffed corn wheat snacks food extruder/machines
Brief introduction
Core filling snacks machinery can take corn, rice, wheat, oat, rye and other grains as materials to produce extruded snacks, with crispy taste and lively shape, Core-filling snacks machine is designed according to market demand. We can get different shapes: round, triangle, square, stars, flower, etc
  This processing line from feeding, extruding, shaping ,cutting , oil spraying to finished products are done once time automatically. Visible auto-temperature controlling system, make the temperature-controlling to be more direct-viewing, parameter to be more precise.
   The screws are made by ally steel and special craft, the screw life is longer, uses building block system structure, may combine willfully.The forced lubrication system can guarantee equipment transmission longer life.
China standard industrial voltage for the machine:
Three phases: 380V/50Hz, Single phase: 220V/50Hz, We can make it according to customers' Local voltage according to different countries (400V 415V 480V ).
Processing Flow ChartÂ
Mixing-Extruding-Shaping-Conveying---Baking-Spraying--Seasoning
Equipments ListÂ
Mixer--Screw Conveyor-Twin-screw Extruder-Core Filler---Multi-Function Shaper-Big elevator---Five-layer Oven-Elevator-Oil Sprayer flavoring line
Technical parameters:Â
Model ParameterÂ
KS-65C Processing Line
KS-65D Processing Line
KS-70A Processing Line
Installed capacity
63.41KW
52.13KW
86.06KW
OutputÂ
100-150Â KG/H
100-150 KG/H
250-300KG/H
Dimension
18000*1200*2000MM
23500*1800*2600MM
26000*2000*4000MM
Packing
   Every machine is packed with great care and tough material. It is packed with cling films first and then film bags. At last, it is packed with wooden case which is reinforced with the iron bar on the top and bottomWith this kind machine, all our laser machine can protect well during long trip by sea or by train.We can transport machine by boat or by training, according to your requirement.
1. What's the pre-sale service of your company?
2. Provide the standard device and the flow chart
3. According to the clients' special requirement, offering the reasonable plan and free design helping to select the equipment
2. What's the service during the sale?
1. Help client design the factory and offering professional advice, free engineering drawing for the factory layout.
2. Welcome to visit our factory or the domestic clients' factory.
3. Inspect the machine before leaving the factory.
3. What's the service after the sale?
1. Oversea install and debug the equipment.
2. Train the first-line operator.
3. Provide the basic formula
4. Supply with 12 months warranty and life-time maintenance.
1). Operator Needed: 3-5Â
2). Guarantee time: one yearÂ
3). We provide Turnkey Project Â
      a. Provide factory layout according to your factory size in advance.Â
      b. Provide the recipe when your esteemed company cooperate with us. Â
      c. Before place the order, we invite you to visit us and make demonstration for you in workshop Â
      d. Before delivery the machines, we invite you to inspect all the machines.Â
      e. Installation and commissioning in your factory for 15daysÂ
4). Payment terms: 30% T/T as down payment, 70% by irrevocable L/C at sight or T/T before  delivering.Â
5). Delivery time: 30-40 days after receipt the deposit, we have extruder, dryer and flaking machine in workshop.
Model NO.: KS-85
Voltage: 220V/50Hz 380V/50Hz
Energy: Electrical/Gas/Coal
Warranty: 1 Year
Capacity: 100-600kg/H
Manufacturer: Jinan Keysong Comppany
Trademark: Keysong
Transport Package: Wooden Case
Specification: 20000*3000*2600mm
Origin: Shandong China
HS Code: 8438800000
Model NO.: KS-85
Voltage: 220V/50Hz 380V/50Hz
Energy: Electrical/Gas/Coal
Warranty: 1 Year
Capacity: 100-600kg/H
Manufacturer: Jinan Keysong Comppany
Trademark: Keysong
Transport Package: Wooden Case
Specification: 20000*3000*2600mm
Origin: Shandong China
HS Code: 8438800000
 Stainless Steel Twin Screw Puffed Corn Snack Food Extruder Machine
Features:
 Stainless Steel Twin Screw Puffed Corn Snack Food Extruder Machine
Features: